How to install the Oxygen Sensor on 2008 Scion xB?

The installation of the air fuel ratio sensor for 2AZ-FE engine control requires use of Special Service Tool: 09224-00010 with a torque setting at 40 Nm (408 kgf-cm, 30 ft-lbf) or a torque of 44 Nm (449 kgf-cm, 32 ft-lbf when the tool is not available. The torque required to tighten the bolt requires a torque wrench with 300 mm (11.81 in.) fulcrum length together with a 30 mm (1.18 in.) Special Service Tool. The air fuel ratio sensor connector should get connected once the installation completes. The last step involves installing the No. 1 exhaust manifold heat insulator with 4 bolts while tightening them to 12 Nm (122 kgf-cm, 9 ft-lbf). The last check involves a leak inspection of the exhaust gas system.

OEM 2008 Scion xB Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2008 Scion xB Oxygen Sensor, Rear
Part Number: 89465-12A00
$125.95 MSRP: $178.29
You Save: $52.34 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear
- Position: Rear
- Part Name Code: 89465
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.4 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-12A00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2008 Scion xB Oxygen Sensor
Part Number: 89467-12070
$210.15 MSRP: $300.06
You Save: $89.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Sensor, Air Fuel Ratio
- Part Name Code: 89467B
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 3.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-12070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Oxygen Sensor

Looking for affordable OEM 2008 Scion xB Oxygen Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xB Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Oxygen Sensor Parts Q&A

Q: How to install the Oxygen Sensor on 2008 Scion xB?
A: The installation of the air fuel ratio sensor for 2AZ-FE engine control requires use of Special Service Tool: 09224-00010 with a torque setting at 40 Nm (408 kgf-cm, 30 ft-lbf) or a torque of 44 Nm (449 kgf-cm, 32 ft-lbf when the tool is not available. The torque required to tighten the bolt requires a torque wrench with 300 mm (11.81 in.) fulcrum length together with a 30 mm (1.18 in.) Special Service Tool. The air fuel ratio sensor connector should get connected once the installation completes. The last step involves installing the No. 1 exhaust manifold heat insulator with 4 bolts while tightening them to 12 Nm (122 kgf-cm, 9 ft-lbf). The last check involves a leak inspection of the exhaust gas system.