×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion xB Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Hood Cables found
2008 Scion xB Release Cable, Front
Part Number: 53630-12640$35.48 MSRP: $49.39You Save: $13.91 (29%)Ships in 1 Business DayProduct Specifications- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Part Name Code: 53630
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 11.0 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53630-12640
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xB Release Handle, Dark Gray, Front
Part Number: 53601-02020-B1$46.47 MSRP: $64.68You Save: $18.21 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 0.7 x 12.4 x 20.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53601-02020-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xB Hood Cable
Looking for affordable OEM 2008 Scion xB Hood Cable? Explore our comprehensive catalogue of genuine 2008 Scion xB Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xB Hood Cable Parts Q&A
- Q: How to install the hood cable assembly and related components on 2008 Scion xB?A: Before installation of the hood cable assembly you must feed it into the engine compartment through the upper radiator support before attaching clamps according to illustrations. To proceed with installation secure the hood lock control lever sub-assembly while establishing a connection with the hood cable. The hood lock assembly requires application of MP grease to sliding segments before receiving the hood cable for bolt installation with 7.5 Nm (76 kgf-cm, 66 in-lbf) torque value. Perform needed adjustments to the hood sub-assembly during inspection. Two bolts should be installed into the water hose clamp bracket before tightening them to 5.0 Nm (51 kgf-cm, 44 in-lbf). The radiator cover requires 5 clips for installation. Install the LH front fender liner by fitment of 3 new grommets, 8 clips and 4 screws and the pin hold clip. Begin by placing the front side mudguard LH through its new grommet then fasten it with 2 screws followed by attaching the front wheel opening extension pad LH through 2 screws before secure the front wheel.