×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion tC Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Wiper Motor found
2008 Scion tC Wiper Motor, Front
Part Number: 85110-21080$219.24 MSRP: $313.02You Save: $93.78 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor; Motor Assembly, Windshield Wiper
- Position: Front
- Part Name Code: 85110
- Item Weight: 3.80 Pounds
- Item Dimensions: 10.0 x 5.6 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85110-21080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion tC Wiper Motor
Looking for affordable OEM 2008 Scion tC Wiper Motor? Explore our comprehensive catalogue of genuine 2008 Scion tC Wiper Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion tC Wiper Motor Parts Q&A
- Q: How to install the windshield wiper motor and link assembly on 2008 Scion tC?A: Start the windshield wiper motor installation by positioning the wiper link assembly then fix the windshield wiper motor with 3 bolts torqued at 5.4 Nm (55 kgf-cm, 47 in-lbf). Before placing the wiper link rod on the wiper link you should position the crank arm manually to reach the specified point and apply Denso No. 50 grease to the pivot joint. The wiper link should be installed after this step. Use four bolts to install the windshield wiper motor and link assembly while torquing them to 5.4 Nm (55 kgf-cm, 47 in-lbf). Attach the connector afterwards. Attach the cowl top ventilator louver LH through 5 claws and 2 clips after which secure 8 clips to join the hood to cowl top seal. When installing the front wiper arm and blade assembly LH, first stop the windshield wiper motor at its automatic stop position by operating the wiper before cleaning the assembly parts. Then install the components starting from the nut which requires 34.3 Nm (350 kgf-cm, 25 ft-lbf) torque while securing the nut by holding the hinge manually. The front wiper arm assembly with blade for the right-hand side needs to be cleaned before installation while the nut receives a torque of 34.3 Nm (350 kgf-cm, 25 ft-lbf). Install the front wiper arm head caps before connecting the cable to the negative battery terminal and initializing system processes since some systems need such procedures after disconnecting and reconnecting the cable from the negative (-) battery terminal.