How to service the ignition switch on 2007 Toyota Tacoma?

Service of the ignition switch starts by disconnecting the cable from the negative battery terminal. Begin service by removing the steering column cover LWR which needs the removal of its 2 screws and 2 claw disconnection. You should disconnect the connector before unclipping the two clamps which allows you to remove the ignition or starter switch. Installation requires the installation of ignition switch followed by reinstallation of steering column cover LWR before completing the procedure by connecting the cable to the negative battery terminal with 3.9 N.m (40 kgf.cm, 35 in.lbf) torque.

OEM 2007 Toyota Tacoma Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2007 Toyota Tacoma Position Sensor
Part Number: 84052-71010
$61.21 MSRP: $85.91
You Save: $24.70 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma Ignition Switch
Part Number: 84450-71010
$103.17 MSRP: $144.81
You Save: $41.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Part Name Code: 84450
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.4 x 5.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2007 Toyota Tacoma Ignition Switch

Looking for affordable OEM 2007 Toyota Tacoma Ignition Switch? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service the ignition switch on 2007 Toyota Tacoma?
A: Service of the ignition switch starts by disconnecting the cable from the negative battery terminal. Begin service by removing the steering column cover LWR which needs the removal of its 2 screws and 2 claw disconnection. You should disconnect the connector before unclipping the two clamps which allows you to remove the ignition or starter switch. Installation requires the installation of ignition switch followed by reinstallation of steering column cover LWR before completing the procedure by connecting the cable to the negative battery terminal with 3.9 N.m (40 kgf.cm, 35 in.lbf) torque.