How to service and repair the Cruise Control Switch on 2007 Toyota Tacoma?

Begin Repair of the Cruise Control Main Switch by following the Restraint Systems Service Precautions. The negative battery terminal cable needs to be disconnected before waiting at least 90 seconds to avoid Air Bag activation. The repair sequence starts with removing the lower No. 2 steering wheel cover followed by the lower No. 3 cover and ending with the steering pad assembly removal. Start by disconnecting the connector before removing the two screws which will later allow you to extract the cruise control main switch from the steering wheel. You should install the cruise control main switch by using two screws while connecting its respective connector. Install first the steering pad assembly followed by lower No. 3 steering wheel cover and then lower No. 2 steering wheel cover. The cable installation on the negative battery terminal requires a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf), following which check both the steering pad assembly and the SRS warning light.

OEM 2007 Toyota Tacoma Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2007 Toyota Tacoma Safety Switch
Part Number: 88280-14030
$22.81 MSRP: $31.75
You Save: $8.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Clutch; Clutch Switch; Switch Assembly; Switch; Switch Assembly, Cruise Control(Auto Drive) Release
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 6.4 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Product Grade: Performance Parts
- SKU: 88280-14030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner, TRD Pro, X-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Toyota Tacoma On/Off Switch
Part Number: 84632-08021
$142.97 MSRP: $202.39
You Save: $59.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Speed Control; Cruise Control Switch; Multi Purpose Switch; Main Switch; Cruise Switch; Engagement Switch; Set/Resume Switch; Switch Assembly, Cruise Control
- Replaces: 84632-34011, 84632-0F010, 84632-34010, 84632-08020
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.5 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84632-08021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
- Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2007 Toyota Tacoma Cruise Control Switch

Looking for affordable OEM 2007 Toyota Tacoma Cruise Control Switch? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Cruise Control Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the Cruise Control Switch on 2007 Toyota Tacoma?
A: Begin Repair of the Cruise Control Main Switch by following the Restraint Systems Service Precautions. The negative battery terminal cable needs to be disconnected before waiting at least 90 seconds to avoid Air Bag activation. The repair sequence starts with removing the lower No. 2 steering wheel cover followed by the lower No. 3 cover and ending with the steering pad assembly removal. Start by disconnecting the connector before removing the two screws which will later allow you to extract the cruise control main switch from the steering wheel. You should install the cruise control main switch by using two screws while connecting its respective connector. Install first the steering pad assembly followed by lower No. 3 steering wheel cover and then lower No. 2 steering wheel cover. The cable installation on the negative battery terminal requires a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf), following which check both the steering pad assembly and the SRS warning light.