OEM 2007 Toyota Solara Throttle Body

2007 Toyota Solara Parts Questions & Experts Answers

• Q: How to service and repair the throttle body on 2007 Toyota Solara?

  A: Service and repair operations on the throttle body require users to drain engine coolant first. First detach the air cleaner cap combined with the air cleaner hose before removing the throttle body assembly by disconnecting the throttle control motor connector and throttle position sensor and the vacuum hose and both water by-pass hoses. The gasket removal should begin by taking out the four bolts and fuel pipe support and throttle body. After applying a new gasket onto the intake manifold install the throttle body with the fuel pipe support by tightening its four bolts to 30 N.m (305 kgf.cm, 22 ft.lbf). Secure all connections between the throttle body and both water by-pass hoses with the throttle control motor and throttle position sensor connector and the vacuum hose. Install the air cleaner cap together with the hose then check for leaks by adding engine coolant.