×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2007 Toyota Solara Thermostat
Engine Coolant Thermostat- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostats found
2007 Toyota Solara Water Inlet
Part Number: 90916-A3003$22.69 MSRP: $31.59You Save: $8.90 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Thermostat; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 90916-03129, 90916-03084
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 0.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-A3003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Solara Thermostat
Part Number: 90916-03136$28.19 MSRP: $39.24You Save: $11.05 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Engine Coolant Thermostat
- Replaces: 90916-C3001
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 0.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03136
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Solara Thermostat
Looking for affordable OEM 2007 Toyota Solara Thermostat? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Solara Thermostat Parts Q&A
- Q: How to service and repair a thermostat on 2007 Toyota Solara?A: Engine coolant drainage is the first step when servicing or repairing the thermostat. After draining engine coolant you should take off the fan and generator V belt and finally disconnect the generator assembly. Disassemble the radiator hose inlet before unconnecting the water inlet from the cylinder block once you remove its 2 nuts. Proceed to remove the thermostat. Immersion of the thermostat in water requires a slow heating process during inspection to check for valve opening temperatures between 80 to 84 degrees Celsius (176 to 183 degrees Fahrenheit). A new thermostat needs installation when the temperature range is not met. The thermostat needs replacement once the valve lift measurement is below 10 mm (0.394 inch) at 95 degrees Celsius (203 degrees Fahrenheit) or if the valve fails to close completely when the temperature drops to 40 degrees Celsius (104 degrees Fahrenheit). Put a new gasket on the thermostat first before installing it at an upward angle with the jiggle valve positioned correctly to allow 10 degrees variance. Install the water inlet by applying 9.0 Nm torque on the 2 nuts before adding the radiator hose inlet and generator assembly and fan and generator V belt. Into the system you must put engine coolant while inspecting for fluid leakage.