×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2007 Toyota Solara Cam Gear
Camshaft Gear- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Cam Gears found
2007 Toyota Solara Timing Pulley
Part Number: 13523-20020$46.95 MSRP: $65.36You Save: $18.41 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Pulley, Camshaft Timing; Engine Timing Camshaft Sprocket; Variable Valve Timing Sprocket; Timing Gear; Cam Gear; Camshaft Gear; Timing Gear Set; Gear; Pulley
- Manufacturer Note: (J)
- Replaces: 13523-0A010
- Part Name Code: 13523P
- Item Weight: 3.30 Pounds
- Item Dimensions: 13.8 x 11.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 13523-20020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Solara Timing Gear
Part Number: 13523-0D010$43.84 MSRP: $61.03You Save: $17.19 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sprocket, Camshaft Timing; Engine Timing Camshaft Sprocket, Left, Right; Variable Valve Timing Sprocket; Cam Gear; Camshaft Gear; Exhaust Gear; Sprocket; Gear Or Sprocket, Camshaft Timing
- Replaces: 13523-0D020, 13523-22050, 13523-22020
- Part Name Code: 13523
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.5 x 3.9 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13523-0D010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Solara Camshaft Gear, Passenger Side
Part Number: 13050-28021$260.37 MSRP: $371.75You Save: $111.38 (30%)Ships in 1 Business DayProduct Specifications- Other Name: Gear Assembly, Camshaft; Engine Timing Camshaft Sprocket; VVT Sprocket; Cam Gear; Gear Assembly, Camshaft Timing
- Position: Passenger Side
- Replaces: 13050-0H010, 13050-28020, 13050-0H030
- Part Name Code: 13050
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.2 x 4.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13050-28021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Solara Cam Gear
Looking for affordable OEM 2007 Toyota Solara Cam Gear? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Cam Gear. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Solara Cam Gear Parts Q&A
- Q: How to service and repair the Cam Gear/sprocket on 2007 Toyota Solara?A: Starting the camshaft gear/sprocket repair requires removal of the front wheel RH as well as front fender apron seal RH and engine cover sub-assembly No.1 and engine moving control rod with bracket by taking out the 3 bolts. The following service order begins with removing engine mounting stay No.2 RH and engine mounting bracket No.2 RH before proceeding to take off the fan and generator V belt. To service and repair the crankshaft pulley first expand the pulley bolt with Special Service Tool: 09960-10010 and then remove the bolt and pulley completely using Special Service Tool: 09950-40011. Use tools 09308-10010 or 09950-60010 (09951-00200) to extract the timing gear case or timing chain case r oil seal. Before installing an oil seal place MP grease on its lips after inspecting for foreign contaminants and strike it in with Special Service Tool: 09223-22010 and a hammer until it reaches the rear oil seal retainer edge. Remove excess grease from the crankshaft. Install the crankshaft pulley through the pulley set key of its key groove while utilizing Special Service Tool: 09960-10010 (09962-01000, 09963-01000) to tighten the pulley bolt to 170 Nm (1,733 kgf-cm, 125 ft. lbs.). After installing the fan and generator V belt the technician should torque the engine mounting bracket No.2 RH to 52 Nm (531 kgf-cm, 38 ft. lbs.) and the engine mounting stay No.2 RH to 64 Nm (653 kgf-cm, 47 ft. lbs.). The front wheel RH reinstallation procedure begins after bracket and 3 bolting the engine moving control rod with bracket which needs to be torqued to 64 Nm (653 kgf-cm, 47 ft. lbs.). Afterward, check for engine oil leaks.