OEM 2007 Toyota Sequoia A/C Condenser

2007 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to service an A/C Condenser in a refrigerant system on 2007 Toyota Sequoia?

  A: Service of the condenser begins with refrigerant discharge from the refrigeration system which needs to be followed by evacuation and charging the system with the correct amount of liquid: Single A/C requires 750 plus or minus 50 g (26.45 plus or minus 1.76 oz.) and Dual A/C requires 1050 plus or minus 50 g (37.03 plus or minus 1.76 oz.). The service of the condenser begins with removingcondenser cooling fan components and A/T oil cooler assembly and horns and hood lock system, hood lock support brace as well as receiver tank and discharge hose. These parts can be separated using 2 bolts after disconnecting tubes and hoses with a torque setting of 5.4 N.m (5.5 kgf.cm, 48 in.lbf). Invert both tubes and position a cap on each opening. Rub compressor oil onto new O-rings after which the tubes will be inserted with oil-lubricated rings. Disconnect the liquid pipe exactly like the air pipe by applying appropriate caps and lubricating the new O-rings. The cooler condenser assembly must be dismantled by first removing the two bolts before pulling the condenser both forward and upward. The replacement of the condenser requires the addition of 40 to 50 cc (1.4 to 1.7 fl.oz.) of ND-OIL 8 or equivalent compressor oil into the compressor. Reverse procedure of removal should be used for installation.