Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
2007 Toyota RAV4 Wiper Blade
Looking for affordable OEM 2007 Toyota RAV4 Wiper Blade? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota RAV4 Parts Questions & Experts Answers
Q: How to service the rear wiper blade assembly on 2007 Toyota RAV4?
A: Service of the rear wiper blade assembly begins by rotating its cap before removing it followed by raising the arm and blade. When the blade claw makes its "click" sound lift up the wiper until it detaches and then remove it to the left of your vehicle by pulling it straight out. The wiper arm should never be folded alone since this practice threatens the integrity of the back door glass surface. The end of the rear wiper rubber should be lifted gently and pulled from the blade stopper while being cautious about avoiding forceful movements which can warp the backing plates or harm the blade claws. Pushing the rubber between the ends and middle, if necessary, will help with removal. Begin assembling the wiper blade by setting the No. 1 and No. 2 backing plates properly oriented and feed the wiper rubber throughout the second claw from the front end to exit the rear end stopper before moving it to the front end claw. After hooking up the wiper blade assembly to the right side of the vehicle, push it directly and attach it to the wiper arm before lowering both components and rotating to install the cap.