How to service the ignition switch on 2007 Toyota RAV4?

The first step to servicing the ignition switch starts with disconnecting the negative battery cable followed by waiting for at least 90 seconds to avoid Air Bag and seat belt pretensioner activation. The service begins by disconnecting the lower steering column cover through four claw separation followed by the tilt lever release and cover removal. Start by disconnecting both connectors from the ignition switch assembly including the connector for the ignition switch and the ignition key cylinder light connector. Afterward remove the assembly retaining 2 screws. Begin the installation procedure by locking down the ignition switch assembly through two attaching screws followed by establishing the connector signals for the ignition key cylinder light and ignition switch. Reattach the 4 lower steering column claws to install the cover and complete the process by reattaching the cable to the negative battery terminal.

OEM 2007 Toyota RAV4 Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2007 Toyota RAV4 Position Sensor
Part Number: 84052-71010
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-71010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, Platinum, SE, Sport, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota RAV4 Ignition Switch
Part Number: 84450-12200
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Part Name Code: 84450
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 5.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2007 Toyota RAV4 Ignition Switch

Looking for affordable OEM 2007 Toyota RAV4 Ignition Switch? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota RAV4 Ignition Switch Parts Q&A

Q: How to service the ignition switch on 2007 Toyota RAV4?
A: The first step to servicing the ignition switch starts with disconnecting the negative battery cable followed by waiting for at least 90 seconds to avoid Air Bag and seat belt pretensioner activation. The service begins by disconnecting the lower steering column cover through four claw separation followed by the tilt lever release and cover removal. Start by disconnecting both connectors from the ignition switch assembly including the connector for the ignition switch and the ignition key cylinder light connector. Afterward remove the assembly retaining 2 screws. Begin the installation procedure by locking down the ignition switch assembly through two attaching screws followed by establishing the connector signals for the ignition key cylinder light and ignition switch. Reattach the 4 lower steering column claws to install the cover and complete the process by reattaching the cable to the negative battery terminal.