My Garage
Cart

OEM 2007 Toyota Prius Throttle Body

Fuel Injection Throttle Body
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

  • 2007 Toyota Prius Throttle Body - 22030-21020
    2007 Toyota Prius Throttle Body Diagram - 22030-21020
    View related parts

    2007 Toyota Prius Throttle Body

    Part Number: 22030-21020
    $378.06 MSRP: $554.05
    You Save: $175.99 (32%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Body Assembly, Throttle; Fuel Injection Throttle Body Assembly; Fuel Injection ETB Assembly; Body Assembly, Throttle W/Throttle Position Sensor
    • Part Name Code: 22030
    • Item Weight: 3.00 Pounds
    • Item Dimensions: 9.0 x 7.8 x 6.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 22030-21020
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2007 Toyota Prius Submodels:
    • Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2007 Toyota Prius Throttle Body

Looking for affordable OEM 2007 Toyota Prius Throttle Body? Explore our comprehensive catalogue of genuine 2007 Toyota Prius Throttle Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Prius Parts Questions & Experts Answers

  • Q: How to service and repair the throttle body on 2007 Toyota Prius?
    A: The first step for repairing or servicing the throttle body consists of disconnecting the negative battery cable while waiting at least 90 seconds to avoid Air Bag and seat belt pretensioner activation. The first step begins with removing the engine under cover LH while drainage of engine coolant occurs before removing the radiator support opening cover by uninstalling the 6 clips. The first step toward air cleaner assembly removal requires users to disconnect the MAF meter connector and wire harness clamp and loosen the hose clamp bolt to detach the No.1 air cleaner inlet and remove two bolts and separate the air cleaner through a clamp bolt release process. Remove the throttle body assembly with motor by disconnecting all components including ventilation hoses, No. 1 fuel vapor feed hose, water by-pass hoses, throttle control motor connector, throttle position sensor connector, and then removing the bolt with 2 nuts before taking off the throttle with motor body and removing its intake manifold gasket. Proceed with installing the new gasket on the intake manifold before using the bolt and 2 nuts to fasten the throttle with motor body at 20 N.m (204 kgf.cm, 15 ft.lbf). Reconnect the throttle position sensor and throttle control motor connectors followed by attaching the water by-pass hoses and fuel vapor feed hose. You should install the air cleaner assembly by tightening its 2 bolts to 7.0 N.m (71 kgf.cm, 62 in.lbf) before securing hose clamp bolts to 3.0 N.m (31 kgf.cm, 27 in.lbf) and reconnecting the MAF meter connector. Add engine coolant while attaching the cable to the negative battery terminal and inspect for leaks then reattach the engine under cover LH together with the radiator support opening cover using its 6 clips. A system initialization step must be done following cable disconnect and reconnect from the negative battery terminal during certain procedures.

Related 2007 Toyota Prius Parts