OEM 2007 Toyota Matrix Oil Filter

2007 Toyota Matrix Parts Questions & Experts Answers

• Q: How to replace the oil and oil filter on 2007 Toyota Matrix?

  A: Start by using protective gear to prevent exposed skin from contact with engine oil while replacing the oil filter and engine oil since you need to wash your skin thoroughly with soap and water after the procedure. Find authorized disposal locations to get rid of used oil as well as filters. Start the process by taking away the engine under cover RH before draining engine oil through removing the oil filler cap along with the oil drain plug and disposing the fluid into a container. To secure the cleaned oil drain plug use a new gasket before torquing it to 37 N m (377 kgf cm, 27 ft. lbf). Proceed with removing the oil filter sub-assembly by utilizing Special Service Tool: 09228-06501. Installation of an oil filter starts with a surface cleaning before applying fresh engine oil to the gasket of a new filter which should be loosely screwed into position until the gasket touches the seat. Mount Special Service Tool: 09228-06501 if space permits to reach an oil filter torque of 13 N m (133 kgf cm, 10 ft. lbf) but only perform hand-tightening of 3/4 turn if space proves restricted. The last step involves replacing the oil filler cap with fresh engine oil while performing leak checks and reinstalling the engine under cover on the right-hand side.