×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2007 Scion tC A/C Clutch
Air Conditioning Clutch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Clutches found
2007 Scion tC Clutch Plate & Hub Assembly
Part Number: 88410-21040$160.14 MSRP: $226.70You Save: $66.56 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Part Name Code: 88410
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.0 x 7.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-21040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Scion tC Clutch Plate & Hub Assembly
Part Number: 88410-21030$175.06 MSRP: $247.83You Save: $72.77 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Clutch Assembly; A/C Compressor Clutch; Clutch; Clutch Assembly, Magnet
- Part Name Code: 88410
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.0 x 6.8 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-21030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Scion tC A/C Clutch
Looking for affordable OEM 2007 Scion tC A/C Clutch? Explore our comprehensive catalogue of genuine 2007 Scion tC A/C Clutch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Scion tC A/C Clutch Parts Q&A
- Q: How to remove and replace the A/C Clutch on 2007 Scion tC?A: Begin compressor clutch replacement by removing refrigerant from the refrigeration system and cutting off the negative battery terminal cable which requires 90 seconds of waiting time before starting the task. You need to disconnect the No. 1 cooler refrigerant suction hose by unbolting the fastener while taking out the O-ring before applying vinyl tape at both openings to stop moisture and foreign material infiltration. Move on to the procedure of separating the No. 1 cooler refrigerant discharge hose in a similar process. The procedure starts with engine under cover removal along with fan and generator V belt before the cooler compressor assembly can be disconnected and its four bolts removed. The installation process requires fitting the four bolts on the cooler compressor assembly at a torque of 25 N.m (255 kgf.cm, 18 ft.lbf) and connecting the connector. The No. 1 cooler refrigerant discharge hose installation requires vinyl tape removal followed by adding compressor oil (ND-OIL 8 or equivalent) to a new O-ring and the fitting surface then adding the O-ring and screwing the hose in place using a bolt torqued to 9.8 N.m (100 kgf.cm, 7 ft.lbf). Rephrase the same procedure for installing the No. 1 cooler refrigerant suction hose. Reinstall the engine under cover RH before reestablishing the cable connection to the negative battery terminal and the fan along with generator V belt. Initialization steps must be done because selected vehicle systems need system initialization following battery connector removal. The technician should charge the refrigerant system after engine warm-up while checking for any refrigerant leakages.