How to reassemble the Clutch Slave Cylinder on 2006 Toyota Tundra?

The reinstallation of the Clutch Slave Cylinder begins by installing the bleeder plug with 11 Nm (110 kgf-cm, 8 ft. lbs.) torque before applying lithium soap base glycol grease to the piston. The piston needs to receive a coating of lithium soap base glycol grease. You should position the piston along with its spring inside the cylinder. The push rod needs to be connected to the boot before installing the boot with its associated push rod to the cylinder.

OEM 2006 Toyota Tundra Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2006 Toyota Tundra Slave Cylinder
Part Number: 31470-35181
$60.61 MSRP: $85.08
You Save: $24.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-35180
- Part Name Code: 31470
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.7 x 5.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31470-35181
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2006 Toyota Tundra Clutch Slave Cylinder

Looking for affordable OEM 2006 Toyota Tundra Clutch Slave Cylinder? Explore our comprehensive catalogue of genuine 2006 Toyota Tundra Clutch Slave Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Tundra Parts Questions & Experts Answers

Q: How to reassemble the Clutch Slave Cylinder on 2006 Toyota Tundra?
A: The reinstallation of the Clutch Slave Cylinder begins by installing the bleeder plug with 11 Nm (110 kgf-cm, 8 ft. lbs.) torque before applying lithium soap base glycol grease to the piston. The piston needs to receive a coating of lithium soap base glycol grease. You should position the piston along with its spring inside the cylinder. The push rod needs to be connected to the boot before installing the boot with its associated push rod to the cylinder.