×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Toyota Tacoma Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Radiators found
2006 Toyota Tacoma Radiator
Part Number: 16410-0C190$207.49 MSRP: $296.24You Save: $88.75 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Radiator Assembly, L/Cap; Radiator Assembly
- Part Name Code: 16400
- Item Weight: 13.30 Pounds
- Item Dimensions: 34.0 x 28.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16410-0C190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Tacoma Radiator
Part Number: 16410-AZ006$138.94 MSRP: $196.37You Save: $57.43 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Radiator Assembly, L/Cap
- Item Weight: 14.70 Pounds
- Item Dimensions: 35.4 x 28.6 x 7.1 inches
- Condition: New
- SKU: 16410-AZ006
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Other Name: Radiator Assembly, L/Cap; Radiator Assembly
- Part Name Code: 16400
- Item Weight: 12.50 Pounds
- Item Dimensions: 33.7 x 28.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16410-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator Assembly
- Part Name Code: 16400
- Item Weight: 1.40 Pounds
- Item Dimensions: 35.2 x 26.3 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16410-0P040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator Assembly
- Part Name Code: 16400
- Item Weight: 19.80 Pounds
- Item Dimensions: 37.1 x 6.1 x 26.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16410-0C180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Tacoma Radiator
Looking for affordable OEM 2006 Toyota Tacoma Radiator? Explore our comprehensive catalogue of genuine 2006 Toyota Tacoma Radiator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Tacoma Radiator Parts Q&A
- Q: How to service and repair the radiator on 2006 Toyota Tacoma?A: You should start radiator service and repair by disassembling the radiator drain cock plug and O-ring from it. Lay out the Special Service Tool 09230-01010 (09231-01010, 09231-01030) by sliding its hole into part A and utilize dimension B to adjust stopper bolt measurements between 0.2 and 0.3 mm without harming the equipment. The core plate caulking needs straightening with Special Service Tool until the stopper bolt stops the motion. You must lightly hit the radiator tank bracket or pipe with a soft-faced hammer to remove both the upper radiator tank and lower tank after which you must repeat this step for the lower tank. Thoroughly inspect the radiator core sub-assembly for damage while using pliers to shape the core plate groove properly before replacing the core plate in case of bottom groove damage because the radiator requires two caulkings before replacement. New radiator tanks should be installed to both sections while using a soft-faced hammer to carefully tap the core plate until no gap remains. Repeat this process for the lower tank section. After inserting the punch assembly into the overhaul handle users should set dimension B to 8.4 mm using the stopper bolt. Users should then carefully press the tool against the core plate in specified portions while avoiding the oil cooler and air ducts. Check the core plate height (H) which should be 8.7 to 9.1 mm after caulking. Readjustments may be necessary. The final step requires you to put a new O-ring on the drain cock plug before installing the plug.