×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Toyota Solara Intake Valve
Engine Intake Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Valves found
2006 Toyota Solara Valve, Intake
Part Number: 13711-0H010$16.12 MSRP: $22.44You Save: $6.32 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Intake Valve
- Replaces: 13711-0H030, 13711-28010
- Part Name Code: 13711
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.0 x 2.0 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 13711-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Solara Valve, Intake
Part Number: 13711-20020$13.85 MSRP: $19.28You Save: $5.43 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Intake Valve
- Manufacturer Note: (J)
- Replaces: 13711-0A010
- Part Name Code: 13711
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.9 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13711-20020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Solara Intake Valve
Looking for affordable OEM 2006 Toyota Solara Intake Valve? Explore our comprehensive catalogue of genuine 2006 Toyota Solara Intake Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Solara Intake Valve Parts Q&A
- Q: How to service the Exhaust Valve and Intake Valve clearance on 2006 Toyota Solara?A: Service the valve clearance by first taking off components at the front wheel RH, front fender apron seal RH, engine No.1 cover sub-assembly, spark plug, ventilation hoses, engine wire, and cylinder head cover sub-assembly. Disconnect the engine wire harness clamp then remove 8 bolts and 2 nuts plus the cylinder head cover and gasket using these components. Turn the crankshaft until the teeth of its pulley fit into TDC position of the timing chain cover at number 0 timing mark while having both camshaft timing gear and sprocket timing marks match bearing caps No. 1 to No. 2 marks. To install the part you should wipe any oil from contact areas before placing seal packing (Part No. 08826-00080 or equivalent) according to provided locations. Replace the cylinder head cover within 5 minutes after packing application. The engine must remain off for more than two hours before starting after you install the new parts. Fasten the cylinder head cover with all 10 bolts while tightening them to 11 Nm at 110 kgf-cm or 8 ft. lbs. Afterward, secure the spark plug using 19 Nm torque at 194 kgf-cm or 14 ft. lbs. Reinstall the ride-hand front wheel lastly check for oil leaks.