×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Toyota RAV4 Steering Column Cover
Steering Column Cover Bezel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Steering Column Covers found
2006 Toyota RAV4 Column Cover
Part Number: 45286-42919-B0$107.82 MSRP: $151.34You Save: $43.52 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover Set, Steering Column; Steering Column Cover; Shroud; Cover, Steering Column
- Replaces: 45286-42915-B0
- Part Name Code: 45286
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.4 x 7.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45286-42919-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota RAV4 Cover Sub-Assembly, Steering Column Hole, Lower
Part Number: 45025-0R020$76.54 MSRP: $107.44You Save: $30.90 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover Sub-Assembly, Steering Column
- Position: Lower
- Replaces: 45025-42080
- Part Name Code: 45025D
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45025-0R020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota RAV4 Steering Column Cover
Looking for affordable OEM 2006 Toyota RAV4 Steering Column Cover? Explore our comprehensive catalogue of genuine 2006 Toyota RAV4 Steering Column Cover. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota RAV4 Steering Column Cover Parts Q&A
- Q: How to service the steering column cover on 2006 Toyota RAV4?A: Service of the steering column cover in 2006 RAV4 vehicles begins with disconnecting the negative (-) cable from the battery terminal for a minimum of 90 seconds to avoid Air Bag deployment. The removal of the steering pad requires putting front wheels straight ahead followed by unscrewing the two T30 Torx screws before gently extracting the pad while avoiding Air Bag wire harnesses tension. The disconnected procedures should begin with wires from both Air Bag connectors and the horn connector. The steps for removing the steering wheel assembly begin with detaching the nut followed by identifying matchmarks between the wheel and column and disconnecting all spiral cable connectors before applying grease to Special Service Tool: 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021) for tool removal. When removing the steering column cover start by releasing the tilt lever followed by pushing the lower cover sides inward to break the claws and removing both covers. To properly install the components you should activate both pins and claws from the covers while verifying a total gap absence. Reinstall the steering wheel assembly using correct matchmarks while screwing the nut to 50 Nm (510 kgf-cm, 37 ft-lbf) before connecting all spiral cable connectors. You should reposition the steering pad while verifying the safety of Air Bag connectors before applying 8.8 Nm force to both screws (90 kgf-cm, 78 in-lbf). Verify the SRS warning light operation by turning ignition ON after reconnecting the negative (-) battery terminal. Additional medical examinations will become necessary in case symptoms develop.