How to replace the Engine Control Module (ECM) on 2006 Toyota Matrix?

The first step to replace the Engine Control Module (ECM) requires disconnecting the battery negative terminal. Disassembly of the glove compartment starts with removing the stopper screw to free the assembly for upward motion after deforming the upper section. The ECM removal process requires a clip remover to unfasten two clips and open the cover while disconnecting the four ECM connectors which allows removal of the wire harness from the clamp followed by screw removal and unclipping of the claw and clip for ECM extraction. Begin by removing the ECM cover and then remove the ECM brackets by taking out four DELCO MADE screws or two DENSO MADE screws from each of Bracket No. 2 and No. 3. Place ECM bracket No. 3 using 2 screws to achieve 3.2 N.m (33 kgf.cm, 28 in.lbf) torque and proceed to install bracket No. 2 at the same torque. Use 2 screws to fasten the DENSO MADE ECM bracket while tightening them to 3.2 N.m (33 kgf.cm, 28 in.lbf) and secure the DELCO MADE bracket with 4 screws at the same specified torque. Place the new ECM cover onto the ECM before you fasten the ECM with 2 screws tightened to 3.0 N.m (31 kgf.cm, 27 in.lbf) then join all 4 ECM connectors and close the wire harness clamp with 2 clips. To finish the installation, replace the glove compartment door assembly while performing VIN registration after securing the battery terminal at 5.4 N.m (55 kgf.cm, 48 in.lbf).

OEM 2006 Toyota Matrix Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Control Modules found

View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02D34
$310.54 MSRP: $443.38
You Save: $132.84 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-02D35, 89661-02D31, 89661-02C40, 89661-02D30, 89661-02D33, 89661-02D32
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.8 x 10.2 x 4.1 inches
- Condition: New
- SKU: 89661-02D34
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02D40
$454.82 MSRP: $666.53
You Save: $211.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Item Weight: 2.30 Pounds
- Condition: New
- SKU: 89661-02D40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02F71
$441.15 MSRP: $646.51
You Save: $205.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-02F70
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.1 x 10.2 x 4.0 inches
- Condition: New
- SKU: 89661-02F71
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02D64
$397.58 MSRP: $582.65
You Save: $185.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-02C73, 89661-02C70, 89661-02C72, 89661-02D63, 89661-02D61, 89661-02D62, 89661-02C71
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.6 x 9.9 x 3.9 inches
- Condition: New
- SKU: 89661-02D64
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02F80
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Manufacturer Note: PART NUMBER LABEL=89661-02F80
- Part Name Code: 89661
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.1 x 7.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-02F80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix ECM
Part Number: 89661-02D10
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Item Weight: 2.30 Pounds
- Condition: New
- SKU: 89661-02D10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS

2006 Toyota Matrix Engine Control Module

Looking for affordable OEM 2006 Toyota Matrix Engine Control Module? Explore our comprehensive catalogue of genuine 2006 Toyota Matrix Engine Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Matrix Parts Questions & Experts Answers

Q: How to replace the Engine Control Module (ECM) on 2006 Toyota Matrix?
A: The first step to replace the Engine Control Module (ECM) requires disconnecting the battery negative terminal. Disassembly of the glove compartment starts with removing the stopper screw to free the assembly for upward motion after deforming the upper section. The ECM removal process requires a clip remover to unfasten two clips and open the cover while disconnecting the four ECM connectors which allows removal of the wire harness from the clamp followed by screw removal and unclipping of the claw and clip for ECM extraction. Begin by removing the ECM cover and then remove the ECM brackets by taking out four DELCO MADE screws or two DENSO MADE screws from each of Bracket No. 2 and No. 3. Place ECM bracket No. 3 using 2 screws to achieve 3.2 N.m (33 kgf.cm, 28 in.lbf) torque and proceed to install bracket No. 2 at the same torque. Use 2 screws to fasten the DENSO MADE ECM bracket while tightening them to 3.2 N.m (33 kgf.cm, 28 in.lbf) and secure the DELCO MADE bracket with 4 screws at the same specified torque. Place the new ECM cover onto the ECM before you fasten the ECM with 2 screws tightened to 3.0 N.m (31 kgf.cm, 27 in.lbf) then join all 4 ECM connectors and close the wire harness clamp with 2 clips. To finish the installation, replace the glove compartment door assembly while performing VIN registration after securing the battery terminal at 5.4 N.m (55 kgf.cm, 48 in.lbf).