How to replace the Seat Position Air Bag Sensor on 2006 Toyota Matrix?

The first step to replace the Seat Position Air Bag Sensor involves adhering to all Air Bag Systems service precautions to guarantee safety. Cut power to the battery by disconnecting its negative terminal and wait for at least 90 seconds while performing the next steps. After removing the front LH seat assembly the installer should take off the front seat cushion shield LH and the seat slide position sensor protector. A torx T30 security wrench allows you to remove the torx screw after disconnecting the connector which controls the seat position Air Bag sensor. The installation process for the new seat position Air Bag sensor must be performed while keeping the ignition switch off and maintaining the negative battery terminal disconnected. Users should install the sensor with a 0.039 inch (1 mm) feeler gauge while being cautious to protect the sensor and preventing the SRS wiring from pinching. The seat position Air Bag sensor needs to stay 0.6 mm (0.023 in.) to 2 mm (0.079 in.) apart from the seat rail. Before complete installation ensure the torx screw reaches its specified torque limit of 8.0 N.m with 82 kgf.cm and 71 inch pounds. Proper clearance must be present for a secure finish. Reinstall the seat slide position sensor protector while also reattaching the connector to the seat position Air Bag sensor followed by reinstallation of the front seat cushion shield LH and front LH seat assembly. The SRS warning light inspection should follow battery negative terminal reconnection.

OEM 2006 Toyota Matrix Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2006 Toyota Matrix Position Sensor, Passenger Side
Part Number: 89178-06020
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left, Right; Air Bag Sensor; Occupant Sensor; Seat; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix Front Impact Sensor
Part Number: 89173-09120
$98.34 MSRP: $118.58
You Save: $20.24 (18%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix Side Impact Sensor, Front
Part Number: 89831-02040
$97.87 MSRP: $118.00
You Save: $20.13 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front, Upper; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-02040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix Side Impact Sensor, Lower
Part Number: 89831-02030
$86.14 MSRP: $103.86
You Save: $17.72 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Lower; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Manufacturer Note: NO.1
- Position: Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-02030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2006 Toyota Matrix Position Sensor, Front Driver Side
Part Number: 89178-33020
$99.11 MSRP: $139.12
You Save: $40.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
- Position: Front Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.2 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS

2006 Toyota Matrix Air Bag Sensor

Looking for affordable OEM 2006 Toyota Matrix Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Matrix Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Matrix Parts Questions & Experts Answers

Q: How to replace the Seat Position Air Bag Sensor on 2006 Toyota Matrix?
A: The first step to replace the Seat Position Air Bag Sensor involves adhering to all Air Bag Systems service precautions to guarantee safety. Cut power to the battery by disconnecting its negative terminal and wait for at least 90 seconds while performing the next steps. After removing the front LH seat assembly the installer should take off the front seat cushion shield LH and the seat slide position sensor protector. A torx T30 security wrench allows you to remove the torx screw after disconnecting the connector which controls the seat position Air Bag sensor. The installation process for the new seat position Air Bag sensor must be performed while keeping the ignition switch off and maintaining the negative battery terminal disconnected. Users should install the sensor with a 0.039 inch (1 mm) feeler gauge while being cautious to protect the sensor and preventing the SRS wiring from pinching. The seat position Air Bag sensor needs to stay 0.6 mm (0.023 in.) to 2 mm (0.079 in.) apart from the seat rail. Before complete installation ensure the torx screw reaches its specified torque limit of 8.0 N.m with 82 kgf.cm and 71 inch pounds. Proper clearance must be present for a secure finish. Reinstall the seat slide position sensor protector while also reattaching the connector to the seat position Air Bag sensor followed by reinstallation of the front seat cushion shield LH and front LH seat assembly. The SRS warning light inspection should follow battery negative terminal reconnection.