×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Toyota Matrix ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 ABS Control Modules found
2006 Toyota Matrix Modulator Valve
Part Number: 44050-01050$1587.72 MSRP: $1998.63You Save: $410.91 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.20 Pounds
- Item Dimensions: 9.2 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Matrix Actuator Assembly
Part Number: 44050-01040$888.81 MSRP: $1118.83You Save: $230.02 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.9 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Other Name: Actuator Assembly, Brake; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.1 x 6.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: W(REAR DISC BRAKE)
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.9 x 7.7 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota Matrix ABS Control Module
Looking for affordable OEM 2006 Toyota Matrix ABS Control Module? Explore our comprehensive catalogue of genuine 2006 Toyota Matrix ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Matrix ABS Control Module Parts Q&A
- Q: How to replace the ABS Control Module and traction actuator on 2006 Toyota Matrix?A: The first step for changing the ABS & traction actuator consists of draining brake fluid and washing off any paint-contaminated fluid. Begin the replacement by removing four items including the front wheel RH, front fender liner RH, front bumper cover and LH headlamp assembly and windshield washer jar assembly. You must use Special Service Tool: 09023-00101 to detach the 6 brake tubes from the actuator with bracket using memo tags or position notes for reinstallation. The actuator with bracket can be removed after unbolting the two pieces and nut while being careful to protect brake tubes and wire harnesses. You should remove the ABS & traction actuator assembly by unscrewing its two nuts. First tighten the 2 bracket-mounted nuts on the ABS & traction actuator assembly to 6.0 Nm (61 kgf-cm, 53 inch lbs.) then proceed to bolt the actuator with bracket using 2 bolts and a nut to a torque of 20 Nm (204 kgf-cm, 15 ft. lbs.) while ensuring to tighten bolts in sequence from 1 to 3 and to verify actuator connector secure lock. Attach each brake tube to its proper position on the actuator with bracket by using Special Service Tool: 09023-00101 and tightening them to 15 Nm (155 kgf-cm, 11 ft. lbs.). The windshield washer jar assembly alongside the LH headlamp assembly and front bumper cover with the front fender liner and front wheel RH should be installed before torquing the wheel to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). The braking system procedure requires brake fluid filling followed by bleeding the master cylinder through Special Service Tool: 09023-00101 and brake line bleeding before performing fluid bleeding on the ABS & traction actuator assembly. Check the brake fluid level in the reservoir then inspect for fluid leakage before using a hand-held tester to evaluate the actuator. Vehicle preparation for fog lamp adjustment starts with yaw rate sensor calibration followed by checking the readiness of the vehicle for aiming before inspecting and adjusting both vehicle fixtures. Finally the test will evaluate both headlamp adjustability.