OEM 2006 Toyota Avalon Wiper Motor

2006 Toyota Avalon Parts Questions & Experts Answers

• Q: How to replace the windshield wiper motor assembly on 2006 Toyota Avalon?

  A: Plant the first step to swap the windshield wiper motor assembly by dismantling both FR wiper arm & blade assembly LH by unscrewing their nuts. Use the same methods to remove the FR wiper arm & blade assembly RH secondly. Use a tool to disconnect the 12 clips which will remove the cowl top ventilator louver on the right-hand side. Following the removal of the wiper motor connector you must remove four bolts that detach the windshield wiper motor & link assembly. You must twist a wrapped screwdriver to detach the rod of the wiper link assembly from the windshield wiper motor assembly before removing its 3 bolts. Screw three bolts from the new windshield wiper link assembly while torquing them to 7.5 N.m (76 kgf.cm, 66 in.lbf). Afterward, mount the rod onto the wiper link assembly. Secure the four bolts on the windshield wiper motor & link assembly while torquing them to 7.0 N.m (71 kgf.cm, 62 in.lbf), then ensure proper connection of the connector. After stopping the windshield wiper motor assembly at the automatic stop position run the wipers perform a cleaning operation on the wiper arm serrations and wiper pivot serrations using a wire brush before reinstallation. Install the FR wiper arm & blade assembly RH with its nut positioned as shown while tightening it to 20 N.m (209 kgf.cm, 15 ft.lbf) but maintain the hand grip on the arm hinge to secure the nut. The wiper arm & blade assembly LH should be placed in its correct position and torqued to 20 N.m (209 kgf.cm, 15 ft.lbf) with manual arm hinge support to secure the nut.