How to service and repair the Knock Sensor on 2005 Toyota Tundra?

In order to service the Knock Sensor, it is necessary to remove the cylinder head and disconnect the heater water inlet hose. Turn off outlet pipe N0.1 of water, unplug the connectors to knock sensor, and take out the sensors. Install new sensors, reconnect all, and then torque to the required values, and then place the cylinder head back.

OEM 2005 Toyota Tundra Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2005 Toyota Tundra Knock Sensor
Part Number: 89615-06010
$138.05 MSRP: $195.42
You Save: $57.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tundra Submodels:
- 1794 Edition, Base, Capstone, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2005 Toyota Tundra Knock Sensor

Looking for affordable OEM 2005 Toyota Tundra Knock Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Tundra Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Tundra Knock Sensor Parts Q&A

Q: How to service and repair the Knock Sensor on 2005 Toyota Tundra?
A: In order to service the Knock Sensor, it is necessary to remove the cylinder head and disconnect the heater water inlet hose. Turn off outlet pipe N0.1 of water, unplug the connectors to knock sensor, and take out the sensors. Install new sensors, reconnect all, and then torque to the required values, and then place the cylinder head back.

Related 2005 Toyota Tundra Parts

Alternate Year Models

2004 Toyota Tundra Knock Sensor 2006 Toyota Tundra Knock Sensor