How to service and repair the Brake Master Cylinder with Plate Cylinder Sub-Assembly on 2005 Toyota Tacoma?

Service processes for the Brake Master Cylinder with Plate Cylinder Sub-Assembly begin by disconnecting the negative battery cable then draining brake fluid before cleaning off immediately any paint-contacted fluid. The brake master with plate cylinder sub-assembly removal process starts by disconnecting the brake fluid level warning switch connector followed by separating the clutch reservoir tube from the reservoir of manual transmissions and utilizing Special Service Tool: 09023-00101 to disconnect two brake lines from the brake master cylinder. Using an appropriate tool remove the two nuts and then extract the master cylinder from the booster before removing its O-ring. Monitor the length of the brake booster push rod during an inspection that also verifies an absence of vacuum in the brake booster through multiple brake pedal pumping sessions with the engine engine turned off. The included accessory tool from a new brake master cylinder sub-assembly needs chalk application on its tip to measure brake booster push rod clearance against the accessory tool for a target of 0 mm (0 inch). The required adjustments can be made using Special Service Tool: 09737-00020 to alter the length of the adjusting bolt by fixing the push rod while maintaining sufficient brake pedal depression. After fitting the new O-ring the master cylinder should be mounted onto the brake booster using two nuts that get torqued at 12.5 Nm (127 kgf-cm, 9 ft. lbs.). Reapply the brake fluid warning switch connector and reinstall the clutch reservoir tube for vehicles with manual transmission following the connection of brake lines to the brake master cylinder using Special Service Tool: 09023-00101 while using torque settings at 15 Nm (153 kgf-cm, 11 ft. lbs.). After filling the reservoir with brake fluid, use Special Service Tool: 09023-00101 for bleeding the master cylinder followed by bleeding the brake line. Check the fluid level and look for fluid leaks before verifying pedal height and free play and reserve distance then torque the negative battery cable to 3.9 Nm (40 kgf-cm, 35 inch lbs.).

OEM 2005 Toyota Tacoma Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Master Cylinders found

View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47028-04040
$292.64 MSRP: $417.82
You Save: $125.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master W/Plate
- Part Name Code: 47028
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.1 x 7.7 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47028-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47028-04030
$246.04 MSRP: $351.28
You Save: $105.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master W/Plate
- Manufacturer Note: MEXICO SPEC(W/O (VSC, SIDE & *CUSA))
- Part Name Code: 47028
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.2 x 7.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47028-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47050-04020
$2268.20 MSRP: $3324.07
You Save: $1055.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster Assembly, W/Master Cylinder
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47210L
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.3 x 7.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47050-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47050-04040
$1688.98 MSRP: $2475.22
You Save: $786.24 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster Assembly, W/Master Cylinder
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47210L
- Item Weight: 2.40 Pounds
- Item Dimensions: 9.9 x 7.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47050-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47025-04040
$1256.76 MSRP: $1841.79
You Save: $585.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.6 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47025-04020
$1256.76 MSRP: $1841.79
You Save: $585.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.4 x 3.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47025-04050
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Part Name Code: 47201
- Item Weight: 7.70 Pounds
- Item Dimensions: 21.2 x 12.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47050-04030
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster Assembly, W/Master Cylinder
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47210L
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.2 x 7.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47050-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47025-04030
Product Specifications
- Other Name: Cylinder Sub-Assembly; Brake Master Cylinder; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: VSC-WITH(W/AUTO LSD)
- Part Name Code: 47201
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.9 x 7.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47025-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Master Cylinder
Part Number: 47050-04050
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster Assembly, W/Master Cylinder
- Part Name Code: 47210L
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.0 x 7.6 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47050-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS

2005 Toyota Tacoma Brake Master Cylinder

Looking for affordable OEM 2005 Toyota Tacoma Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the Brake Master Cylinder with Plate Cylinder Sub-Assembly on 2005 Toyota Tacoma?
A: Service processes for the Brake Master Cylinder with Plate Cylinder Sub-Assembly begin by disconnecting the negative battery cable then draining brake fluid before cleaning off immediately any paint-contacted fluid. The brake master with plate cylinder sub-assembly removal process starts by disconnecting the brake fluid level warning switch connector followed by separating the clutch reservoir tube from the reservoir of manual transmissions and utilizing Special Service Tool: 09023-00101 to disconnect two brake lines from the brake master cylinder. Using an appropriate tool remove the two nuts and then extract the master cylinder from the booster before removing its O-ring. Monitor the length of the brake booster push rod during an inspection that also verifies an absence of vacuum in the brake booster through multiple brake pedal pumping sessions with the engine engine turned off. The included accessory tool from a new brake master cylinder sub-assembly needs chalk application on its tip to measure brake booster push rod clearance against the accessory tool for a target of 0 mm (0 inch). The required adjustments can be made using Special Service Tool: 09737-00020 to alter the length of the adjusting bolt by fixing the push rod while maintaining sufficient brake pedal depression. After fitting the new O-ring the master cylinder should be mounted onto the brake booster using two nuts that get torqued at 12.5 Nm (127 kgf-cm, 9 ft. lbs.). Reapply the brake fluid warning switch connector and reinstall the clutch reservoir tube for vehicles with manual transmission following the connection of brake lines to the brake master cylinder using Special Service Tool: 09023-00101 while using torque settings at 15 Nm (153 kgf-cm, 11 ft. lbs.). After filling the reservoir with brake fluid, use Special Service Tool: 09023-00101 for bleeding the master cylinder followed by bleeding the brake line. Check the fluid level and look for fluid leaks before verifying pedal height and free play and reserve distance then torque the negative battery cable to 3.9 Nm (40 kgf-cm, 35 inch lbs.).

Related 2005 Toyota Tacoma Parts

Alternate Year Models

2004 Toyota Tacoma Brake Master Cylinder 2006 Toyota Tacoma Brake Master Cylinder