OEM 2005 Toyota Sequoia Throttle Body

2005 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to service and repair the throttle body on 2005 Toyota Sequoia?

  A: The throttle body service procedure starts with taking off the throttle body cover while draining engine coolant. You must first remove the intake air connector followed by disconnecting the throttle control connector before unpredicting the 2 water bypass hoses from the throttle body. Detach the throttle body from the intake manifold by unfastening its bolt and 3 nuts. Install the throttle body by positioning it correctly and fasten it with the nut and 3 bolts while torquing them to 14 N.m (143 kgf.cm, 10 ft.lbf). Rejoin the intake air connector alongside the throttle control connector and the 2 water bypass hoses then replace it with the intake air connector. After engine coolant fills the system and the engine starts the inspection should include a check for coolant leaks until the throttle body cover installation completes the process.