OEM 2005 Toyota RAV4 Fuel Pressure Regulator

2005 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to Service and Repair a Fuel Pressure Regulator on 2005 Toyota RAV4?

  A: The first task when replacing a Fuel Pressure Regulator requires removal of the fuel pump assembly with sender gauge from the fuel tank. You must separate the fuel suction plate from its assembly while disconnecting the fuel sender gauge connector and ground plate before applying 2 screwdrivers to slowly release the fuel suction plate without hurting the suction support or fuel suction plate. Disconnect the fuel pump connector. You should begin replacing the fuel pressure regulator by unclamping the fuel return jet tube after which you must pull the pressure regulator free and extract the O-ring from it. The pressure regulator installation requires a fresh O-ring which should receive a light gasoline application before pushing it inside the pressure regulator. Fasten the last of the fuel return jet tubes to its clamp. Reattach the fuel suction plate through these steps: link the fuel pump connector and secure the plate to the fuel filter and fuel pump assembly and join both the fuel sender gauge connector with its ground plate. Installations of both components back to their original position inside the fuel tank will finish the procedure.