OEM 2005 Toyota 4Runner Drive Belt

2005 Toyota 4Runner Parts Questions & Experts Answers

• Q: How to replace the FAN AND GENERATOR DRIVE BELT on 2005 Toyota 4Runner?

  A: For a successful FAN AND GENERATOR V BELT replacement one must start by removing the engine under cover sub-assembly No.1 through its 4 bolt removal. The V-ribbed belt removal step begins by slowing the belt tension through counterclockwise motion on the belt tensioner. Start the V-ribbed belt tensioner assembly inspection process by rotating it clockwise followed by counter-clockwise motion to confirm no obstacles exist before performing a tensioner replacement if needed. The correct procedure for installing the new V-ribbed belt involves first turning the belt tensioner counterclockwise followed by placing it within the holes before applying a 6 mm (0.24 inch) bar to maintain tension. After installing the V-ribbed belt, users should take out the 6 mm (0.24 inch) bar as they continue to turn the belt tensioner counterclockwise. Struggling during belt installation requires position of the V-ribbed belt across all components except the P/S pump before accomplishing tension release for fitting the belt to the P/S pump. Reinstall the engine under cover sub-assembly No.1 through the 4 bolts while tightening them to 29 Nm (296 kgf-cm, 21 ft. lbs.).