×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Scion xA Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Drive Belts found
2005 Scion xA Serpentine Belt
Part Number: 90916-02705$21.74 MSRP: $30.25You Save: $8.51 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: AIR CONDITIONER COMPRESSOR-WITHOUT
- Replaces: 90916-02556, 90916-02543
- Part Name Code: 16361A
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-02705
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Scion xA Power Steering Belt
Part Number: 90916-02711$11.10 MSRP: $15.46You Save: $4.36 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt
- Replaces: 90916-02576, 90916-02575, 99363-30850
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.4 x 7.1 x 0.7 inches
- Condition: New
- SKU: 90916-02711
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Scion xA Drive Belt
Looking for affordable OEM 2005 Scion xA Drive Belt? Explore our comprehensive catalogue of genuine 2005 Scion xA Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Scion xA Drive Belt Parts Q&A
- Q: How to replace the drive belt on 2005 Scion xA?A: Start by removing the two belts one after the other beginning with the fan and generator V-belt by releasing bolt A and B which then allows you to remove the V-ribbed belt from its tension. The most recent step is to remove the vane pump V-belt using the same procedures as step two. Copy the new vane pump V-belt to both pulleys and do the same for the fan and generator V-belt installation. Adjust the fan and generator V-belt tension by inserting an adjusting bar between the engine RH mount bracket and generator while pushing the bar towards the vehicle front but avoid placing the bar between the oil control valve and generator due to possible damage. Start with bolt A tightening followed by bolt B tightening for vane pump V-belt installation. The bolt A torque measurement must be 19 Nm and 54 Nm for bolt B, equivalent to 189 kgf-cm, 14 ft. lbs. and 550 kgf-cm, 40 ft. lbs. respectively. The vane pump V-belt requires tension adjustment using the bar that starts with bolt B torque tightening followed by tightening Bolt A to 44 Nm (449 kgf-cm, 33 ft. lbs.). The inspection should involve checking both deflection and tension of the drive belt.