My Garage
Cart

OEM Scion xA Drive Belt

Serpentine Belt
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drive Belts found

  • Scion xA Drive Belt Diagram - 90916-02711
    View related parts

    Scion xA Power Steering Belt

    Part Number: 90916-02711
    $11.10 MSRP: $15.46
    You Save: $4.36 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt
    • Replaces: 90916-02576, 90916-02575, 99363-30850
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2004-2006 Scion xA | Base | 4 Cyl 1.5 L GAS
  • Scion xA Drive Belt Diagram - 90916-02705
    View related parts

    Scion xA Serpentine Belt

    Part Number: 90916-02705
    $21.74 MSRP: $30.25
    You Save: $8.51 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
    • Manufacturer Note: AIR CONDITIONER COMPRESSOR-WITHOUT
    • Replaces: 90916-02556, 90916-02543
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2004-2006 Scion xA | Base | 4 Cyl 1.5 L GAS

Scion xA Drive Belt

If you're thinking about purchasing OEM parts for your Scion xA, our website is your one-stop destination. We stock an extensive selection of genuine Scion xA Drive Belt at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xA Drive Belt Parts and Q&A

  • Q: How to replace the drive belt on Scion xA?
    A: In replacing the drive belt, one needs to remove the fan and generator v-belt, and loosen bolts A and B, then the engine under cover RH and vane pump V-belt. Install belts, and tension with a bar, tighten bolts A and B with recommended torque. Lastly, check deflection and tension of belt.
  • Q: How to service and repair the drive belt on Scion xA?
    A: To remove the drive belt, unscrew bolt A and B, the engine under cover RH and the vane pump V belt. Install the two belts, tension them with a special tool and tighten bolts to a given torque. Lastly, dry the check and put back cover.

Related Scion xA Parts