OEM 2004 Toyota Solara Wheel Stud

2004 Toyota Solara Parts Questions & Experts Answers

• Q: How to replace a Wheel Stud on the front axle LH hub on 2004 Toyota Solara?

  A: The procedure to change the front wheel stud starts by removing the wheel followed by separating the front disc brake caliper assembly LH and removing the front disc. Begin by installing two of the nuts and washers to the front wheel stud according to the provided illustration. Then use Special Service Tool: 09628-10011 combined with a screwdriver or similar tool as a front axle holder to remove the front wheel stud. Insert a washer and nut to the new front wheel stud according to the displayed diagram and tighten the nut with a screwdriver to hold the front axle while securing the bolt. Reinstallation of components must begin with the front disc followed by the front disc brake caliper assembly LH and end with the front wheel. Torque the components to 103 Nm (1,050 kgf-cm, 76 ft. lbs.).