×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2004 Toyota Solara Knock Sensor
Engine Knock Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Knock Sensor found
2004 Toyota Solara Knock Sensor
Part Number: 89615-06010$138.05 MSRP: $195.42You Save: $57.37 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Solara Knock Sensor
Looking for affordable OEM 2004 Toyota Solara Knock Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Solara Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Solara Knock Sensor Parts Q&A
- Q: How to replace the Knock Sensor on 2004 Toyota Solara?A: The first step when changing a Knock Sensor includes draining engine coolant before beginning the replacement process. Start by removing the air cleaner cap together with the attached air cleaner hose and subsequently remove the throttle body assembly and intake manifold after removing 5 bolts and 2 nuts and taking out the intake manifold and gasket. Begin by disconnecting the knock sensor connector and then remove both the nut and the knock sensor from place. Ensure the new knock sensor receives a torque of 20 N.m (199 kgf.cm, 14 ft.lbf) when installing it with the nut. It is advised to mount the sensor at an angle under 0 degrees below horizontal. The first step involves connecting the sensor connector before you put on a new gasket along with the intake manifold by tightening 5 bolts and 2 nuts to 30 N.m (306 kgf.cm, 22 ft.lbf). After mounting the throttle body assembly users should install the air cleaner cap along with its hose. After checking the vacuum hose connection you need to install engine coolant before searching for any coolant leakages.