How to replace the FRONT CONTROL ARM SUB-ASSY LOWER NO.1 LH on 2004 Toyota Sienna?

The FIRST STEP to replace the FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH requires removal of the ENGINE ASSEMBLY WITH TRANSAXLE followed by uninstalling the TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR through its 3 nuts. Begin by detaching the FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH through removal of the 2 front side bolts plus a bolt and nut from the rear side and subsequently remove the arm together with its front lower arm bush stopper. Begin by securing the front lower arm bush stopper to the front suspension arm sub-assy lower No.1 LH before using the bolt and nut to install it on the rear side while tightening them to 206 Nm (2,100 kgf-cm, 152 ft. lbs.). Fasten the 2 front side bolts before torquing them to 200 Nm (2,040 kgf-cm, 148 ft. lbs.). Put back the TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE) by tightening its 3 nuts to 87 Nm (887 kgf-cm, 64 ft. lbs.), following which reassemble the ENGINE ASSEMBLY WITH TRANSAXLE.

OEM 2004 Toyota Sienna Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
2004 Toyota Sienna Control Arm, Lower Driver Side
Part Number: 48069-08021
$157.20 MSRP: $222.55
You Save: $65.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm
- Position: Lower Driver Side
- Replaces: 48069-08020
- Part Name Code: 48069
- Item Weight: 1.40 Pounds
- Item Dimensions: 18.9 x 15.9 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-08021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Toyota Sienna Control Arm, Passenger Side
Part Number: 48068-08021
$188.02 MSRP: $268.45
You Save: $80.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm
- Position: Passenger Side
- Replaces: 48068-08020
- Part Name Code: 48068
- Item Weight: 10.60 Pounds
- Item Dimensions: 20.6 x 13.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-08021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2004 Toyota Sienna Control Arm

Looking for affordable OEM 2004 Toyota Sienna Control Arm? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the FRONT CONTROL ARM SUB-ASSY LOWER NO.1 LH on 2004 Toyota Sienna?
A: The FIRST STEP to replace the FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH requires removal of the ENGINE ASSEMBLY WITH TRANSAXLE followed by uninstalling the TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR through its 3 nuts. Begin by detaching the FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH through removal of the 2 front side bolts plus a bolt and nut from the rear side and subsequently remove the arm together with its front lower arm bush stopper. Begin by securing the front lower arm bush stopper to the front suspension arm sub-assy lower No.1 LH before using the bolt and nut to install it on the rear side while tightening them to 206 Nm (2,100 kgf-cm, 152 ft. lbs.). Fasten the 2 front side bolts before torquing them to 200 Nm (2,040 kgf-cm, 148 ft. lbs.). Put back the TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE) by tightening its 3 nuts to 87 Nm (887 kgf-cm, 64 ft. lbs.), following which reassemble the ENGINE ASSEMBLY WITH TRANSAXLE.