How to service the ignition coil on 2004 Toyota Land Cruiser?

The starting point for ignition coil service requires removal of the V-bank cover together with the intake air connector. You must disconnect the engine wire from the LH cylinder head cover by separating the engine wire along with its two clamps. Detach the connectors of the ignition coil including the igniter component. After disconnecting the ignition coil with igniter from the spark plugs you must remove the bolt to extract the ignition coil and its igniter. The amount of eight ignition coils (with igniter) must be disconnected according to a torque specification of 7.5 N.m (80 kgf.cm, 66 in.lbf). The process of installation should be completed using the opposite sequence of the removal steps.

OEM 2004 Toyota Land Cruiser Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2004 Toyota Land Cruiser Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS

2004 Toyota Land Cruiser Ignition Coil

Looking for affordable OEM 2004 Toyota Land Cruiser Ignition Coil? Explore our comprehensive catalogue of genuine 2004 Toyota Land Cruiser Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Land Cruiser Ignition Coil Parts Questions & Experts Answers

Q: How to service the ignition coil on 2004 Toyota Land Cruiser?
A: The starting point for ignition coil service requires removal of the V-bank cover together with the intake air connector. You must disconnect the engine wire from the LH cylinder head cover by separating the engine wire along with its two clamps. Detach the connectors of the ignition coil including the igniter component. After disconnecting the ignition coil with igniter from the spark plugs you must remove the bolt to extract the ignition coil and its igniter. The amount of eight ignition coils (with igniter) must be disconnected according to a torque specification of 7.5 N.m (80 kgf.cm, 66 in.lbf). The process of installation should be completed using the opposite sequence of the removal steps.