How to service and repair the Clutch Slave Cylinder on 2004 Toyota Echo?

Start Clutch Slave Cylinder repairs by disconnecting the clutch line through the use of Special Service Tool: 09023-00100 while containing the fluid with a container. First remove two bolts from the release cylinder followed by a pullout action. Secure the release cylinder in position by using two bolts that should be tightened to 12 Nm (120 kgf-cm, 9 ft. lbs.). Use Special Service Tool: 09023-00100 to connect the clutch line while torquing it to 15 Nm (155 kgf-cm, 11 ft. lbs.). The brake fluid should be poured into the clutch reservoir while the clutch system must be bled before verifying that no leaks occur.

OEM 2004 Toyota Echo Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2004 Toyota Echo Slave Cylinder
Part Number: 31470-12200
$66.59 MSRP: $93.47
You Save: $26.88 (29%)
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder
- Replaces: 31470-52011, 31470-52010
- Item Weight: 1.40 Pounds
- Item Dimensions: 3.7 x 2.8 x 5.5 inches
- Condition: New
- SKU: 31470-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Echo Submodels:
- Base | 4 Cyl 1.5 L GAS

2004 Toyota Echo Clutch Slave Cylinder

Looking for affordable OEM 2004 Toyota Echo Clutch Slave Cylinder? Explore our comprehensive catalogue of genuine 2004 Toyota Echo Clutch Slave Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Echo Parts Questions & Experts Answers

Q: How to service and repair the Clutch Slave Cylinder on 2004 Toyota Echo?
A: Start Clutch Slave Cylinder repairs by disconnecting the clutch line through the use of Special Service Tool: 09023-00100 while containing the fluid with a container. First remove two bolts from the release cylinder followed by a pullout action. Secure the release cylinder in position by using two bolts that should be tightened to 12 Nm (120 kgf-cm, 9 ft. lbs.). Use Special Service Tool: 09023-00100 to connect the clutch line while torquing it to 15 Nm (155 kgf-cm, 11 ft. lbs.). The brake fluid should be poured into the clutch reservoir while the clutch system must be bled before verifying that no leaks occur.