How to replace the ABS Control Module for Antilock Brakes on 2004 Toyota Corolla?

In order to change the Hydraulic Control Assembly of an Antilock Brake, empty the brake fluid and clean up any spills. Take out the front wheel and fender liner, and disattach the bracket and actuator of the brake. Reconnect the actuator, reconnect the brake tubes and replace the wheel. Fill reservoir, vent system, and be sure system is free of leaks.

OEM 2004 Toyota Corolla ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 ABS Control Module found

View related parts
2004 Toyota Corolla Modulator Valve
Part Number: 44050-02060
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.1 x 8.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-02060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS

2004 Toyota Corolla ABS Control Module

Looking for affordable OEM 2004 Toyota Corolla ABS Control Module? Explore our comprehensive catalogue of genuine 2004 Toyota Corolla ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Corolla ABS Control Module Parts Q&A

Q: How to replace the ABS Control Module for Antilock Brakes on 2004 Toyota Corolla?
A: In order to change the Hydraulic Control Assembly of an Antilock Brake, empty the brake fluid and clean up any spills. Take out the front wheel and fender liner, and disattach the bracket and actuator of the brake. Reconnect the actuator, reconnect the brake tubes and replace the wheel. Fill reservoir, vent system, and be sure system is free of leaks.