How to replace the liftgate lift support on 2003 Toyota Sequoia?

Begin by sliding the clip from the back door stay before pulling it out from the back door using hand support. The clip application followed by movement enables the removal of both the bolts and back door stay from the body. When replacing it is essential to drill a small hole (2.0 - 3.0 mm) at the bottom of the back door stay to release high-pressure gas before disposal but ensure protective safety since chips may escape during the drilling process. Maintain proper handling of the back door stay by keeping the piston rod free from scores and scratches while blocking any paint or oil from reaching it. You must not rotate the piston rod and cylinder while the back door stay extends completely. Secure the new back door stay to the body and then attach it to the back door by torquing all bolts to 19 N.m (195 kgf.cm, 14 ft.lbf).

OEM 2003 Toyota Sequoia Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Lift Supports found

View related parts
2003 Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68905-09025
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Driver Side
- Replaces: 68905-09035
- Part Name Code: 68906
- Item Weight: 2.50 Pounds
- Item Dimensions: 24.3 x 2.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68905-09025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2003 Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68905-09020
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Passenger Side
- Replaces: 68905-09030
- Part Name Code: 68905B
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.6 x 3.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68905-09020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2003 Toyota Sequoia Liftgate Lift Support

Looking for affordable OEM 2003 Toyota Sequoia Liftgate Lift Support? Explore our comprehensive catalogue of genuine 2003 Toyota Sequoia Liftgate Lift Support. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sequoia Parts Questions & Experts Answers

Q: How to replace the liftgate lift support on 2003 Toyota Sequoia?
A: Begin by sliding the clip from the back door stay before pulling it out from the back door using hand support. The clip application followed by movement enables the removal of both the bolts and back door stay from the body. When replacing it is essential to drill a small hole (2.0 - 3.0 mm) at the bottom of the back door stay to release high-pressure gas before disposal but ensure protective safety since chips may escape during the drilling process. Maintain proper handling of the back door stay by keeping the piston rod free from scores and scratches while blocking any paint or oil from reaching it. You must not rotate the piston rod and cylinder while the back door stay extends completely. Secure the new back door stay to the body and then attach it to the back door by torquing all bolts to 19 N.m (195 kgf.cm, 14 ft.lbf).