How to remove and replace the liftgate lift support on 2002 Toyota Sequoia?

Begin by sliding the clip to detach the back door stay from both the back door and support it with your hand. The clip needs to be slid for a second time to extract both the bolts and back door stay from the body. Drilling a hole between 2.0 and 3.0 millimeters (0.079 and 0.118 inches) at the bottom of the back door stay allows pressure to escape before disposal but handle the flying chips during this procedure. Handle the back door stay with care since disassembling it or scratching the piston rod should be avoided while preventing paint and oil from contacting it. Avoid rotating the piston rod alongside the cylinder when the back door stay operates in its maximum extension position. Apply 19 N.m (195 kgf.cm, 14 ft.lbf) of torque when securing both the bolts and back door stay to the body before hooking them up to the back door with matching torque force.

OEM 2002 Toyota Sequoia Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Lift Supports found

View related parts
2002 Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68905-09025
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Driver Side
- Replaces: 68905-09035
- Part Name Code: 68906
- Item Weight: 2.50 Pounds
- Item Dimensions: 24.3 x 2.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68905-09025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68905-09020
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Passenger Side
- Replaces: 68905-09030
- Part Name Code: 68905B
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.6 x 3.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68905-09020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2002 Toyota Sequoia Liftgate Lift Support

Looking for affordable OEM 2002 Toyota Sequoia Liftgate Lift Support? Explore our comprehensive catalogue of genuine 2002 Toyota Sequoia Liftgate Lift Support. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove and replace the liftgate lift support on 2002 Toyota Sequoia?
A: Begin by sliding the clip to detach the back door stay from both the back door and support it with your hand. The clip needs to be slid for a second time to extract both the bolts and back door stay from the body. Drilling a hole between 2.0 and 3.0 millimeters (0.079 and 0.118 inches) at the bottom of the back door stay allows pressure to escape before disposal but handle the flying chips during this procedure. Handle the back door stay with care since disassembling it or scratching the piston rod should be avoided while preventing paint and oil from contacting it. Avoid rotating the piston rod alongside the cylinder when the back door stay operates in its maximum extension position. Apply 19 N.m (195 kgf.cm, 14 ft.lbf) of torque when securing both the bolts and back door stay to the body before hooking them up to the back door with matching torque force.