Other Name: Arm Assembly, Lower Control; Suspension Control Arm, Rear Left Lower; Lateral Link; Lateral Arm; Arm Assembly, Lower Control, Driver Side; Control Arm
Position: Driver Side
Part Name Code: 48730
Item Weight: 3.80 Pounds
Item Dimensions: 24.0 x 3.6 x 3.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48730-42020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Track Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
Position: Lower Driver Side
Part Name Code: 48069
Item Weight: 1.60 Pounds
Item Dimensions: 21.7 x 3.9 x 17.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-42040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Track Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
Position: Passenger Side
Part Name Code: 48068
Item Weight: 1.60 Pounds
Item Dimensions: 21.1 x 3.8 x 17.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-42040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota RAV4 Submodels:
Base | 4 Cyl 2.0 L GAS
2003 Toyota RAV4 Control Arm
Looking for affordable OEM 2003 Toyota RAV4 Control Arm? Explore our comprehensive catalogue of genuine 2003 Toyota RAV4 Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota RAV4 Control Arm Parts Q&A
Q: How to service and repair the rear control arm on 2003 Toyota RAV4?
A: To service the rear control arm, take off the rear wheel and drive shaft (4WD). Unhook ABS sensor (equipped), brake line and parking brake cable. Disassemble the rear axle hub, shock absorber and suspension arms, with the use of specified torque. Install shock absorber pivot pin and bushing and then refit components, rechecking ABS signal and wheel alignment after.