How to replace the rear speed sensor on 2003 Toyota MR2 Spyder?

A customer should begin the rear speed sensor replacement process by disconnecting the speed sensor connector followed by removing the rear wheel. The grommet and clip must be removed first before proceeding to take off the two clamp bolts and bolt and speed sensor. A proper installation of the sensor demands that both the sensor and the knuckle area be clean and that the sensor remains parallel to the knuckle surface throughout bolt tightening. The new speed sensor must use a folded bolt tightened to 8.0 Nm (82 kgf-cm, 71 inch lbs.) before using clamp bolts with 19 Nm (195 kgf-cm, 14 ft. lbs.) body side torque and 5.0 Nm (51 kgf-cm, 44 inch lbs.) upper arm side torque. Before attachment place the grommet along with the clip then secure the rear wheel by screwing it with 103 Nm (1,050 kgf-cm, 76 ft. lbs.). After connecting the speed sensor connector you must inspect the speed sensor signal.

OEM 2003 Toyota MR2 Spyder Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2003 Toyota MR2 Spyder Sensor
Part Number: 89413-17010
$136.05 MSRP: $192.60
You Save: $56.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Transmission Revolution
- Part Name Code: 89413B
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.5 x 2.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-17010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota MR2 Spyder Sensor Ring, Front
Part Number: 89544-52010
$209.57 MSRP: $257.02
You Save: $47.45 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Tone Ring; ABS Sensor; Front Speed Sensor; ABS Rotor
- Manufacturer Note: KOYO
- Position: Front
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota MR2 Spyder Speed Sensor, Rear Driver Side
Part Number: 89546-17030
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor, Rear Left; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89546
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota MR2 Spyder Speed Sensor, Rear Passenger Side
Part Number: 89545-17030
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor, Rear Right; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS

2003 Toyota MR2 Spyder Speed Sensor

Looking for affordable OEM 2003 Toyota MR2 Spyder Speed Sensor? Explore our comprehensive catalogue of genuine 2003 Toyota MR2 Spyder Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota MR2 Spyder Parts Questions & Experts Answers

Q: How to replace the rear speed sensor on 2003 Toyota MR2 Spyder?
A: A customer should begin the rear speed sensor replacement process by disconnecting the speed sensor connector followed by removing the rear wheel. The grommet and clip must be removed first before proceeding to take off the two clamp bolts and bolt and speed sensor. A proper installation of the sensor demands that both the sensor and the knuckle area be clean and that the sensor remains parallel to the knuckle surface throughout bolt tightening. The new speed sensor must use a folded bolt tightened to 8.0 Nm (82 kgf-cm, 71 inch lbs.) before using clamp bolts with 19 Nm (195 kgf-cm, 14 ft. lbs.) body side torque and 5.0 Nm (51 kgf-cm, 44 inch lbs.) upper arm side torque. Before attachment place the grommet along with the clip then secure the rear wheel by screwing it with 103 Nm (1,050 kgf-cm, 76 ft. lbs.). After connecting the speed sensor connector you must inspect the speed sensor signal.