How to replace the Rear Control Arm ASSY No.1 LH on 2003 Toyota Highlander?

The procedure to replace the Rear Suspension Arm ASSY No.1 LH commences by removing both the rear wheel together with the stabilizer bar rear. You must disconnect Rear Suspension Arm No. 1 through bolt removal from the inner side and bolt and nut removal from the rear axle carrier's outer side while holding the bolt steady to remove it and fix the nut. Reposition the rear suspension arm No. 1 by installing the inner side with bolt where the paint mark faces towards the rear then fasten the outer side to the rear axle carrier through bolt and nut entering the bolt from in front of the vehicle. Fully tighten the rear suspension arm ASSY No.1 LH by conducting a torque sequence of 100 Nm (1,020 kgf-cm, 74 ft. lbs.) while installing the bolt and fixing the nut after suspension stabilization. Reinstallation will begin with the stabilizer bar rear along with the rear wheel through a torque setting of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Next, check the rear wheel alignment.

OEM 2003 Toyota Highlander Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
2003 Toyota Highlander Control Arm, Lower Driver Side
Part Number: 48069-06100
$169.42 MSRP: $239.84
You Save: $70.42 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm
- Position: Lower Driver Side
- Replaces: 48069-58010, 48069-28120
- Part Name Code: 48069
- Item Weight: 10.60 Pounds
- Item Dimensions: 2.9 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Highlander Control Arm, Passenger Side
Part Number: 48068-06100
$161.79 MSRP: $229.03
You Save: $67.24 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Lower Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm
- Position: Passenger Side
- Replaces: 48068-28120, 48068-58010
- Part Name Code: 48068
- Item Weight: 7.80 Pounds
- Item Dimensions: 18.2 x 2.8 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2003 Toyota Highlander Control Arm

Looking for affordable OEM 2003 Toyota Highlander Control Arm? Explore our comprehensive catalogue of genuine 2003 Toyota Highlander Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Highlander Control Arm Parts Q&A

Q: How to replace the Rear Control Arm ASSY No.1 LH on 2003 Toyota Highlander?
A: The procedure to replace the Rear Suspension Arm ASSY No.1 LH commences by removing both the rear wheel together with the stabilizer bar rear. You must disconnect Rear Suspension Arm No. 1 through bolt removal from the inner side and bolt and nut removal from the rear axle carrier's outer side while holding the bolt steady to remove it and fix the nut. Reposition the rear suspension arm No. 1 by installing the inner side with bolt where the paint mark faces towards the rear then fasten the outer side to the rear axle carrier through bolt and nut entering the bolt from in front of the vehicle. Fully tighten the rear suspension arm ASSY No.1 LH by conducting a torque sequence of 100 Nm (1,020 kgf-cm, 74 ft. lbs.) while installing the bolt and fixing the nut after suspension stabilization. Reinstallation will begin with the stabilizer bar rear along with the rear wheel through a torque setting of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Next, check the rear wheel alignment.