How to Service the Air Bag Control Module for a 2-Door Vehicle on 2003 Toyota Echo?

Question

Accepted Answer

Service of the Air Bag Control Module for a 2-Door vehicle begins by taking out the front door scuff plate along with front door opening trim, rear seat cushion, rear seatback, rear seatback hinge, rear seat belt, quarter trim, and the retractor part of the front seat outer belt. The first step requires disconnecting the connector from the side Air Bag sensor assembly which must be done with the sensor assembly mounted. Then remove the assembly's three bolts. You must replace the SRS parts with new components during installation because any side Air Bag sensor assembly from a collision should never be reused and sensors should not undergo repairs after a collision. After installing the three bolting system to the side Air Bag sensor assembly keep the torque at 20 N.m (205 kgf.cm, 15 ft.lbf), then attach the connector to the sensor assembly while checking that the proper torque has been achieved. The sensor assembly needs to be replaced by a new one whenever it shows a defect or when it experiences a drop. The SRS wiring must avoid other components and stay free of pinches in its installation. Check to verify that the sensor assembly remains tight after completing sensor installation by performing a shaking action. The last step involves reattaching the retractor part of the front seat outer belt along with quarter trim, rear seat belt, rear seatback hinge, rear seatback, rear seat cushion, front door opening trim and front door scuff plate.

OEM 2003 Toyota Echo Air Bag Control Module

3 Air Bag Control Modules found

2003 Toyota Echo Diagnostic Unit

2003 Toyota Echo Diagnostic Unit

2003 Toyota Echo Diagnostic Unit

2003 Toyota Echo Air Bag Control Module

2003 Toyota Echo Parts Questions & Experts Answers

Related 2003 Toyota Echo Parts

Alternate Year Models