How to service and repair the exhaust pipe on 2003 Toyota Camry?

Service and repair of the exhaust pipe begins with removing the oxygen sensor by disconnecting its connector followed by sensor removal. Start by removing the exhaust pipe No.1 support bracket through the removal of its 2 nuts before using 2 bolts to detach the second support bracket. Begin by removing the exhaust pipe assembly front followed by the floor panel brace rear removal through unscrewing of its 2 bolts. Remove the exhaust pipe assembly center followed by the exhaust pipe damper (A/T transaxle) along with the exhaust pipe assembly tail. Begin installation using the exhaust pipe assembly tail followed by the exhaust pipe damper (A/T transaxle) but be cautious to install the damper without reversing direction while installing the 2 bolts that require 19 Nm (194 kgf-cm, 14 ft. lbs.) torque. Using a new gasket the exhaust pipe assembly center must be installed to join the tail pipe and achieve a torque setting of 56 Nm (571 kgf-cm, 41 ft. lbs.). Install the exhaust pipe assembly front by using new gaskets for front pipe and center pipe and front pipe and exhaust manifold converter connections with torques of 56 Nm (571 kgf-cm, 41 ft. lbs.) and 62 Nm (633 kgf-cm, 46 ft. lbs.), respectively. To complete the installation place the exhaust pipe No.1 support bracket then bolt it with 2 fasteners at 33 Nm (337 kgf-cm, 24 ft. lbs.) torque while the second support bracket gets the same fastener tightening. Installation of the oxygen sensor requires 44 Nm (450 kgf-cm, 33 ft. lbs.) torque while checking for exhaust gas leaks.

OEM 2003 Toyota Camry Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Exhaust Pipes found

View related parts
2003 Toyota Camry Pipe Assembly, Exhaust, Front
Part Number: 17410-0A420
$1125.38 MSRP: $1510.57
You Save: $385.19 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe
- Manufacturer Note: (L)
- Position: Front
- Replaces: 17410-20420
- Part Name Code: 17410
- Item Weight: 11.60 Pounds
- Item Dimensions: 50.1 x 18.7 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A420
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17430-28240
$423.48 MSRP: $568.43
You Save: $144.95 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 44.1 x 12.9 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler
Part Number: 17430-28410
$423.48 MSRP: $568.43
You Save: $144.95 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 10.20 Pounds
- Item Dimensions: 45.3 x 13.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28410
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler
Part Number: 17430-28360
$506.78 MSRP: $680.24
You Save: $173.46 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 11.00 Pounds
- Item Dimensions: 47.1 x 13.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28360
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0H030
$451.72 MSRP: $606.34
You Save: $154.62 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.90 Pounds
- Item Dimensions: 44.0 x 12.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0A020
$535.77 MSRP: $719.16
You Save: $183.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 11.00 Pounds
- Item Dimensions: 43.6 x 12.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0A020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-20190
$535.77 MSRP: $719.16
You Save: $183.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 44.9 x 12.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-20190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0A030
$456.26 MSRP: $612.44
You Save: $156.18 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.50 Pounds
- Item Dimensions: 44.0 x 12.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0A030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0H020
$458.88 MSRP: $615.95
You Save: $157.07 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.80 Pounds
- Item Dimensions: 42.8 x 12.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0A011
$492.69 MSRP: $661.33
You Save: $168.64 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.90 Pounds
- Item Dimensions: 44.0 x 12.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0A011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Front Pipe
Part Number: 17410-0H030
$1137.71 MSRP: $1527.15
You Save: $389.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 12.10 Pounds
- Item Dimensions: 36.1 x 2.7 x 21.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0H030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Front Pipe
Part Number: 17410-0H160
$1166.58 MSRP: $1565.88
You Save: $399.30 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe
- Replaces: 17410-0H020
- Item Weight: 11.70 Pounds
- Item Dimensions: 47.7 x 18.2 x 9.4 inches
- Condition: New
- SKU: 17410-0H160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Intermed Pipe, Center
Part Number: 17420-0H020
$357.80 MSRP: $480.27
You Save: $122.47 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.80 Pounds
- Item Dimensions: 50.4 x 20.2 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0H020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Pipe Assembly, Exhaust, Center
Part Number: 17420-0A060
$370.95 MSRP: $497.93
You Save: $126.98 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust System Kit; Exhaust Pipe
- Position: Center
- Replaces: 17420-20040
- Part Name Code: 17420
- Item Weight: 17.10 Pounds
- Item Dimensions: 55.0 x 20.6 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0A060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17430-28230
$505.84 MSRP: $678.98
You Save: $173.14 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.90 Pounds
- Item Dimensions: 45.3 x 12.9 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0H010
$501.89 MSRP: $673.67
You Save: $171.78 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.70 Pounds
- Item Dimensions: 43.6 x 12.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Front Pipe
Part Number: 17410-28291
$1148.05 MSRP: $1541.02
You Save: $392.97 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: *115=TOYOTA/01-/Y
- Position: Front
- Replaces: 17410-28290
- Part Name Code: 17410
- Item Weight: 11.70 Pounds
- Item Dimensions: 51.0 x 19.5 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-28291
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Camry Front Pipe
Part Number: 17410-0A340
$1168.58 MSRP: $1568.58
You Save: $400.00 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 10.90 Pounds
- Item Dimensions: 48.2 x 18.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Pipe Assembly, Exhaust, Tail
Part Number: 17440-20200
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Pipe; Tail Pipe; Muffler
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 45.3 x 12.8 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-20200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- SE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Camry Front Pipe
Part Number: 17410-0A320
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-0A330
- Part Name Code: 17410
- Item Weight: 11.50 Pounds
- Item Dimensions: 49.1 x 17.8 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A320
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

2003 Toyota Camry Exhaust Pipe

Looking for affordable OEM 2003 Toyota Camry Exhaust Pipe? Explore our comprehensive catalogue of genuine 2003 Toyota Camry Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the exhaust pipe on 2003 Toyota Camry?
A: Service and repair of the exhaust pipe begins with removing the oxygen sensor by disconnecting its connector followed by sensor removal. Start by removing the exhaust pipe No.1 support bracket through the removal of its 2 nuts before using 2 bolts to detach the second support bracket. Begin by removing the exhaust pipe assembly front followed by the floor panel brace rear removal through unscrewing of its 2 bolts. Remove the exhaust pipe assembly center followed by the exhaust pipe damper (A/T transaxle) along with the exhaust pipe assembly tail. Begin installation using the exhaust pipe assembly tail followed by the exhaust pipe damper (A/T transaxle) but be cautious to install the damper without reversing direction while installing the 2 bolts that require 19 Nm (194 kgf-cm, 14 ft. lbs.) torque. Using a new gasket the exhaust pipe assembly center must be installed to join the tail pipe and achieve a torque setting of 56 Nm (571 kgf-cm, 41 ft. lbs.). Install the exhaust pipe assembly front by using new gaskets for front pipe and center pipe and front pipe and exhaust manifold converter connections with torques of 56 Nm (571 kgf-cm, 41 ft. lbs.) and 62 Nm (633 kgf-cm, 46 ft. lbs.), respectively. To complete the installation place the exhaust pipe No.1 support bracket then bolt it with 2 fasteners at 33 Nm (337 kgf-cm, 24 ft. lbs.) torque while the second support bracket gets the same fastener tightening. Installation of the oxygen sensor requires 44 Nm (450 kgf-cm, 33 ft. lbs.) torque while checking for exhaust gas leaks.

Related 2003 Toyota Camry Parts

Alternate Year Models

2002 Toyota Camry Exhaust Pipe 2004 Toyota Camry Exhaust Pipe