How to replace the exhaust pipe on 2004 Toyota Camry?

The replacement process for the exhaust pipe starts by disconnecting Bank 1 Sensor 2 and Bank 2 Sensor 2 connectors followed by taking out the two sensors. Before continuing remove the front exhaust pipe No.1 support bracket by unfastening both the nuts and removing the bracket. The second step involves removing the floor panel brace rear by using a screwdriver to loosen its 2 bolts. The second step involves removing the rear exhaust pipe No.1 support bracket after unfastening its two nuts. Remove the exhaust pipe assembly front by taking off the 2 nuts which secure the manifold converter No. 2 to the pipe front alongside the 2 bolts which secure the manifold converter RH to the pipe front and the 2 bolts and 2 nuts which secure the center to the pipe front. The exhaust pipe tail requirements two nuts for removal after which the pipe assembly center should detach from its two supports and remove its gasket between center and tail. Proceed by taking off the exhaust pipe assembly tail from its three pipe supports. A plastic hammer should strike the tail pipe baffle uniformly to remove it. Install the baffle by positioning the baffle keyway correctly on the pipe key location and then tap it into place. The exhaust pipe assembly tail needs to be installed onto the 3 pipe supports first and then the exhaust pipe assembly center must be installed with a fresh gasket and torqued at 56 Nm (571 kgf-cm, 41 ft. lbs.). Begin by mounting the exhaust pipe assembly front to the exhaust manifold RH where new gaskets are installed before torquing it to 62 Nm (633 kgf-cm, 46 ft. lbs.). Then continue by attaching the exhaust pipe assembly front to the exhaust manifold converter No. 2 using new gaskets while torquing them to 62 Nm (633 kgf-cm, 46 ft. lbs.) and lastly attaching the center pipe with a new gasket that is torqued to 56 Nm (571 kgf-cm, 41 ft. lbs.). The rear exhaust pipe No.1 support bracket must be installed with 33 Nm (337 kgf-cm, 24 ft. lbs.) torque while confirming it goes in its proper orientation. Next to installation of floor panel brace rear with 20 Nm (1199 kgf-cm, 14 ft. lbs.) torque comes the front exhaust pipe No.1 support bracket requiring torque of 33 Nm (337 kgf-cm, 24 ft. lbs.). After mounting the heated oxygen sensors apply 44 Nm (449 kgf-cm, 32 ft. lbs.) torque and inspect exhaust gas leaks while doing necessary repairs to loose or faulty components.

OEM 2004 Toyota Camry Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Exhaust Pipes found

View related parts
2004 Toyota Camry Pipe Assembly, Exhaust, Front
Part Number: 17410-0A420
$1125.38 MSRP: $1510.57
You Save: $385.19 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe
- Manufacturer Note: (L)
- Position: Front
- Replaces: 17410-20420
- Part Name Code: 17410
- Item Weight: 11.60 Pounds
- Item Dimensions: 50.1 x 18.7 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0A420
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-28500
$474.03 MSRP: $636.29
You Save: $162.26 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.90 Pounds
- Item Dimensions: 46.6 x 13.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28500
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-28510
$441.96 MSRP: $593.24
You Save: $151.28 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 11.20 Pounds
- Item Dimensions: 45.3 x 12.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28510
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler
Part Number: 17430-28410
$423.48 MSRP: $568.43
You Save: $144.95 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 10.20 Pounds
- Item Dimensions: 45.3 x 13.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28410
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler
Part Number: 17430-28360
$506.78 MSRP: $680.24
You Save: $173.46 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 11.00 Pounds
- Item Dimensions: 47.1 x 13.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-28360
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler
Part Number: 17440-0H051
$448.57 MSRP: $602.12
You Save: $153.55 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 10.50 Pounds
- Item Dimensions: 44.0 x 12.5 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0A020
$535.77 MSRP: $719.16
You Save: $183.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 11.00 Pounds
- Item Dimensions: 43.6 x 12.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0A020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2004 Toyota Camry Muffler
Part Number: 17440-0H040
$535.77 MSRP: $719.16
You Save: $183.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Pipe Assembly, Exhaust, Tail
- Manufacturer Note: CALIFORNIA SPEC
- Part Name Code: 17430
- Item Weight: 11.10 Pounds
- Item Dimensions: 43.2 x 12.5 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17440-20190
$535.77 MSRP: $719.16
You Save: $183.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 44.9 x 12.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-20190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0A030
$456.26 MSRP: $612.44
You Save: $156.18 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.50 Pounds
- Item Dimensions: 44.0 x 12.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0A030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17440-0H020
$458.88 MSRP: $615.95
You Save: $157.07 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.80 Pounds
- Item Dimensions: 42.8 x 12.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17440-0H020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Front Pipe
Part Number: 17410-0H150
$1125.38 MSRP: $1510.57
You Save: $385.19 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: (L)
- Position: Front
- Replaces: 17410-0H090
- Part Name Code: 17410
- Item Weight: 11.60 Pounds
- Item Dimensions: 48.6 x 18.2 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0H150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Front Pipe
Part Number: 17410-0H160
$1166.58 MSRP: $1565.88
You Save: $399.30 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe
- Replaces: 17410-0H020
- Item Weight: 11.70 Pounds
- Item Dimensions: 47.7 x 18.2 x 9.4 inches
- Condition: New
- SKU: 17410-0H160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Front Pipe
Part Number: 17410-20461
$1477.36 MSRP: $1983.05
You Save: $505.69 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe
- Replaces: 17410-20460
- Item Weight: 11.00 Pounds
- Item Dimensions: 48.7 x 18.8 x 9.4 inches
- Condition: New
- SKU: 17410-20461
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- SE | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Camry Intermediate Pipe, Center
Part Number: 17420-20380
$343.43 MSRP: $449.11
You Save: $105.68 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Intermed Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.10 Pounds
- Item Dimensions: 54.5 x 20.2 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-20380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- SE | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Camry Intermed Pipe, Center
Part Number: 17420-28320
$343.43 MSRP: $449.11
You Save: $105.68 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.40 Pounds
- Item Dimensions: 52.9 x 20.8 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-28320
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-0H121
$474.03 MSRP: $636.29
You Save: $162.26 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Replaces: 17430-0H120
- Part Name Code: 17430
- Item Weight: 10.40 Pounds
- Item Dimensions: 44.4 x 12.3 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0H121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-0H140
$474.03 MSRP: $636.29
You Save: $162.26 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 11.10 Pounds
- Item Dimensions: 43.6 x 12.8 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0H140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-0A261
$505.84 MSRP: $678.98
You Save: $173.14 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Replaces: 17430-0A260
- Part Name Code: 17430
- Item Weight: 10.20 Pounds
- Item Dimensions: 43.6 x 12.2 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0A261
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Camry Muffler W/Tpipe
Part Number: 17430-20140
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.80 Pounds
- Item Dimensions: 44.9 x 13.0 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-20140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

2004 Toyota Camry Exhaust Pipe

Looking for affordable OEM 2004 Toyota Camry Exhaust Pipe? Explore our comprehensive catalogue of genuine 2004 Toyota Camry Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the exhaust pipe on 2004 Toyota Camry?
A: The replacement process for the exhaust pipe starts by disconnecting Bank 1 Sensor 2 and Bank 2 Sensor 2 connectors followed by taking out the two sensors. Before continuing remove the front exhaust pipe No.1 support bracket by unfastening both the nuts and removing the bracket. The second step involves removing the floor panel brace rear by using a screwdriver to loosen its 2 bolts. The second step involves removing the rear exhaust pipe No.1 support bracket after unfastening its two nuts. Remove the exhaust pipe assembly front by taking off the 2 nuts which secure the manifold converter No. 2 to the pipe front alongside the 2 bolts which secure the manifold converter RH to the pipe front and the 2 bolts and 2 nuts which secure the center to the pipe front. The exhaust pipe tail requirements two nuts for removal after which the pipe assembly center should detach from its two supports and remove its gasket between center and tail. Proceed by taking off the exhaust pipe assembly tail from its three pipe supports. A plastic hammer should strike the tail pipe baffle uniformly to remove it. Install the baffle by positioning the baffle keyway correctly on the pipe key location and then tap it into place. The exhaust pipe assembly tail needs to be installed onto the 3 pipe supports first and then the exhaust pipe assembly center must be installed with a fresh gasket and torqued at 56 Nm (571 kgf-cm, 41 ft. lbs.). Begin by mounting the exhaust pipe assembly front to the exhaust manifold RH where new gaskets are installed before torquing it to 62 Nm (633 kgf-cm, 46 ft. lbs.). Then continue by attaching the exhaust pipe assembly front to the exhaust manifold converter No. 2 using new gaskets while torquing them to 62 Nm (633 kgf-cm, 46 ft. lbs.) and lastly attaching the center pipe with a new gasket that is torqued to 56 Nm (571 kgf-cm, 41 ft. lbs.). The rear exhaust pipe No.1 support bracket must be installed with 33 Nm (337 kgf-cm, 24 ft. lbs.) torque while confirming it goes in its proper orientation. Next to installation of floor panel brace rear with 20 Nm (1199 kgf-cm, 14 ft. lbs.) torque comes the front exhaust pipe No.1 support bracket requiring torque of 33 Nm (337 kgf-cm, 24 ft. lbs.). After mounting the heated oxygen sensors apply 44 Nm (449 kgf-cm, 32 ft. lbs.) torque and inspect exhaust gas leaks while doing necessary repairs to loose or faulty components.

Related 2004 Toyota Camry Parts

Alternate Year Models

2003 Toyota Camry Exhaust Pipe 2005 Toyota Camry Exhaust Pipe