Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Right; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side
Position: Front Passenger Side
Part Name Code: 89173A
Item Weight: 0.70 Pounds
Item Dimensions: 4.6 x 3.0 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-49165
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
2002 Toyota Tundra Air Bag Sensor
Looking for affordable OEM 2002 Toyota Tundra Air Bag Sensor? Explore our comprehensive catalogue of genuine 2002 Toyota Tundra Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Tundra Parts Questions & Experts Answers
Q: How to remove and install the Air Bag Sensor Assembly on 2002 Toyota Tundra?
A: The first step to take off the Air Bag Sensor Assembly involves removing its 2 retaining clips from the lower center cover. Keep the sensor assembly installed as you disconnect the connectors that belong to it. The removal of the 4 screws requires a T40 torx wrench that can be either Part No. 09042 - 00020 or a similar locally produced tool before removing the Air Bag sensor assembly. The installation process requires completely new SRS parts while sensors from collision events should be replaced immediately and their repair attempts must be avoided. The Air Bag sensor assembly requires installation through the T40 torx wrench and 4 screws with proper torque set to 20 N.m (205 kgf.cm, 15 ft.lbf). Installation requires proper connection of the Air Bag sensor connectors with torquing of the sensor assembly and a check for SRS wiring clearance from other parts. You should shake the sensor assembly after its installation to test for looseness before installing the lower center cover.