OEM 2001 Toyota Tundra Air Bag Sensor

2001 Toyota Tundra Parts Questions & Experts Answers

• Q: How to remove and install the front Air Bag sensor on 2001 Toyota Tundra?

  A: The first step to remove the front Air Bag sensor includes turning off the ignition so DTCs do not get recorded. The installation of new components should replace worn parts and any sensor that encountered an impact needs immediate replacement. Begin by removing the battery carrier together with battery and battery tray from the left-hand side and afterward disconnect the sensor connector that is installed. The two bolts sustaining the front Air Bag sensor need removal before proceeding. To uninstall the right-hand components start by taking off the air cleaner assembly followed by removal of the front Air Bag sensor connector and subsequent unscrewing of the two bolts and front Air Bag sensor. Install the front Air Bag sensors by using four bolts which must be tightened to 20 N.m (205 kgf.cm, 15 ft.lbf) orientation while ensuring the sensor arrow points toward vehicle front. Components for sensor connection can only be joined during installation and should be checked for correct torque specification. Replace the sensor with a brand new one if either a drop incident occurred or if it displays evidence of damage. The electrical connection check mechanism must be secured by a lock during connector connection to prevent malfunction codes. Reinstallation of the air cleaner assembly completes the process while the 2UZ-FE engine installation requires battery tray and battery and battery carrier installation.