Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Track Control Arm; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side
Position: Lower Driver Side
Part Name Code: 48069
Item Weight: 6.60 Pounds
Item Dimensions: 2.5 x 2.1 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-12160
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota Corolla Submodels:
Base, CE, LE, S, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Position: Passenger Side
Part Name Code: 48068
Item Weight: 6.20 Pounds
Item Dimensions: 17.9 x 12.6 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-12160
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota Corolla Submodels:
Base, CE, LE, S, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Track Control Arm; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Driver Side
Manufacturer Note: W(FRONT STABILIZER)
Position: Lower Driver Side
Replaces: 48069-12170
Part Name Code: 48069
Item Weight: 6.70 Pounds
Item Dimensions: 21.8 x 6.8 x 20.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-12171
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm Assembly; Track Control Arm; Control Arm; Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Manufacturer Note: W(FRONT STABILIZER)
Position: Passenger Side
Replaces: 48068-12170
Part Name Code: 48068
Item Weight: 6.40 Pounds
Item Dimensions: 22.0 x 6.9 x 20.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-12171
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota Corolla Submodels:
CE, DX, LE, S, VE | 4 Cyl 1.8 L GAS
2002 Toyota Corolla Control Arm
Looking for affordable OEM 2002 Toyota Corolla Control Arm? Explore our comprehensive catalogue of genuine 2002 Toyota Corolla Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Corolla Parts Questions & Experts Answers
Q: How to service and repair the front control arm on 2002 Toyota Corolla?
A: Serviceable repairs of the front control arm begin with pulling away the front wheel which requires a torque of 76 ft. lbs. (1,050 kgf-cm and 103 Nm). Proceed by taking out the stabilizer bar and following by detaching the lower suspension arm from the lower ball joint through two nut and bolt removal at 142 Nm (1,450 kgf-cm, 105 ft. lbs.). During the disassembly process of the lower suspension arm for A/T RH side and M/T both sides one must remove three bolts and the lower suspension arm bracket together with the lower suspension arm while applying torque measurements of A: 215 Nm (2,190 kgf-cm, 158 ft. lbs.), B: 175 Nm (1,790 kgf-cm, 129 ft. lbs.) and C: 147 Nm (1,500 kgf-cm, 109 ft. lbs.). Maintain suspended stability on the system before applying torque values to bolts A and B. The A/T LH side requires front suspension crossmember removal with the lower suspension arm through bolt-removal of seven pieces and nut-removal of four pieces along with the lower suspension arm brackets and suspension crossmember which should be secured using torques of A: 175 Nm (1,790 kgf-cm, 129 ft. lbs.), B: 225 Nm (2,305 kgf-cm, 167 ft. lbs.), C: 147 Nm (1,500 kgf-cm, 109 ft. lbs.), D: 60 Nm (620 kgf-cm, Make sure to maintain secure support of the center member throughout this task. To take away the lower suspension arm on the A/T LH side from the suspension crossmember users must detach the bolt while applying 215 Nm (2,190 kgf-cm, 158 ft. lbs.) torque. Front wheel alignment tests need to be performed following equipment installation according to the removal steps in reverse order.