OEM 2002 Toyota Celica ABS Control Module

2002 Toyota Celica Parts Questions & Experts Answers

• Q: How to service and repair the ABS Control Module for Antilock Brakes on 2002 Toyota Celica?

  A: The service and repair process of Antilock Brakes Hydraulic Control Assembly should start with removing the battery components including the clamp and tray. First disconnect the master cylinder followed by extraction of the ECM and ECM bracket with bolt removal and ECM bracket movement to the side. Next, detach the harness clamp while unscrewing the bolt and 2 nuts from the ECM bracket and torque them to 19 Nm (195 kgf-cm, 14 ft. lbs.). Apply Special Service Tool: 09023-00100 to disconnect the 6 brake lines by tightening them to 15 Nm (155 kgf-cm, 11 ft. lbs.). Separate the ABS actuator by first unclipping the hose clamp from the upper part of the actuator bracket and thereafter wrenching out the bolt, nut, and ABS actuator assembly at 19 Nm (195 kgf-cm, 14 ft. lbs.) before taking off the actuator from the bracket with 5.4 Nm (55 kgf-cm, 48 inch lbs.) torque and completing the task by removing 2 holders and 3 cushions from the ABS actuator. Begin the installation process by executing the exact removal steps while adding brake fluid to the reservoir and conducting brake system bleeding until checking for leaks.