×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2002 Toyota Avalon Throttle Cable
Accelerator Throttle Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Throttle Cable found
Product Specifications- Other Name: Cable Assembly, Accelerator; Cable Assembly, Accelerator Control
- Part Name Code: 78180P
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.9 x 11.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 78180-07040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2002 Toyota Avalon Throttle Cable
Looking for affordable OEM 2002 Toyota Avalon Throttle Cable? Explore our comprehensive catalogue of genuine 2002 Toyota Avalon Throttle Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Avalon Throttle Cable Parts Q&A
- Q: How to service and repair the Throttle Cable/linkage on 2002 Toyota Avalon?A: Starting the throttle cable/linkage service requires the removal of the battery followed by disconnecting the cruise control actuator by unfastening its 3 bolts and removing its connector. First disconnect the throttle cable from the engine by separating it from throttle linkage then remove park/neutral position switch followed by the valve body. Begin the throttle cable removal process by disassembly of bolt and retaining plate followed by pulling the cable from the transaxle case. When installing a new throttle cable the stopping mechanism should be positioned 0.8-1.5 mm (0.031 - 0.059 inch) from the end of the outer cable. The inner cable needs to be tightly pulled until one feels resistance then the stopper should be secured where the cable has a 200 mm (7.87 inches) radius of bend. Screw and tighten the new O-ring onto the throttle cable while assuring full seating and fix the retaining plate with its bolt tightened to 5.4 Nm (55 kgf-cm, 48 inch lbs.). Proceed by installing the valve body before attaching the throttle cable to the engine using a torque of 15 Nm (150 kgf-cm) and complete throttle cable adjustment. Repositioning the park/neutral position switch and the cruise control actuator requires securing these parts with their 3 bolts while torquing them to 13 Nm (130 kgf-cm, 9 ft. lbs.); finally attach the connector. Reinstall the battery after which you should perform a testing drive of the vehicle.