Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
Position: Front Passenger Side
Part Name Code: 89542
Item Weight: 1.20 Pounds
Item Dimensions: 2.0 x 5.6 x 7.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89542-35050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota 4Runner Submodels:
Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2002 Toyota 4Runner Speed Sensor
Looking for affordable OEM 2002 Toyota 4Runner Speed Sensor? Explore our comprehensive catalogue of genuine 2002 Toyota 4Runner Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota 4Runner Parts Questions & Experts Answers
Q: How to service the Front Wheel Speed Sensor on 2002 Toyota 4Runner?
A: The service procedure for the Front Wheel Speed Sensor begins with disconnecting its speed sensor connector. The procedure starts with disconnecting the speed sensor connector. Then detach the sensor harness from the steering knuckle and upper arm and side rail by eliminating 4 resin clips along with 3 clamp bolts. Tighten these fittings to 8.0 Nm (82 kgf-cm, 71 inch lbs.) for steering knuckle and upper arm and 12 Nm (122 kgf-cm, 9 ft. lbs.) for side rail. Before installing the speed sensor bolt into the steering knuckle use an 8.0 Nm torque to tighten the bolt. First retrace the removal procedures then check the sensor surface stays flat against the knuckle when tightening the bolt while confirming no objects remain on the sensor or knuckle which will get the sensor installed. Verify the speed sensor signal after completing its installation.