How to Service and Repair the Coolant Temperature Sensor on 2001 Toyota Tundra?

The service and repair of the Engine Coolant Temperature (ECT) Sensor begins with draining the engine coolant. The service requires detachment of throttle body cover and intake air connector followed by disconnecting throttle body from intake manifolds by unscrewing the 2 bolts and 2 nuts while removing the gasket. The service process requires severing of ECT sensor connector which enables ECT sensor removal alongside its gasket. Put the ECT sensor into position while using a fresh gasket and tighten to 20.4 N.m (208 kgf.cm, 15 ft.lbf) then reattach its connector. Reinstall the throttle body to the intake manifolds by putting on a new gasket and fastening the 2 bolts and 2 nuts to a torque of 18 N.m (185 kgf.cm, 13 ft.lbf). Lastly reconnect the accelerator cable. The next step is to insert the intake air connector before adding engine coolant to complete the procedure by placing back the throttle body cover.

OEM 2001 Toyota Tundra Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Temperature Sensors found

View related parts
2001 Toyota Tundra Coolant Temperature Sensor
Part Number: 89422-35010
$63.39 MSRP: $88.98
You Save: $25.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Engine Coolant Temperature Sensor; Sender Unit; Cooling Fan Temp Switch; Sensor, Water Temperature (For E.F.I.); Sensor, Fuel Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.1 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Sensor, Water Temperature (For E.F.I.)
Part Number: 89422-20010
$63.39 MSRP: $88.98
You Save: $25.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Sensor, Oil Temperature; Engine Coolant Temperature Sensor; Coolant Temperature Sensor
- Manufacturer Note: ENGINE BLOCK
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.8 x 12.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2001 Toyota Tundra Coolant Temperature Sensor

Looking for affordable OEM 2001 Toyota Tundra Coolant Temperature Sensor? Explore our comprehensive catalogue of genuine 2001 Toyota Tundra Coolant Temperature Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Tundra Parts Questions & Experts Answers

Q: How to Service and Repair the Coolant Temperature Sensor on 2001 Toyota Tundra?
A: The service and repair of the Engine Coolant Temperature (ECT) Sensor begins with draining the engine coolant. The service requires detachment of throttle body cover and intake air connector followed by disconnecting throttle body from intake manifolds by unscrewing the 2 bolts and 2 nuts while removing the gasket. The service process requires severing of ECT sensor connector which enables ECT sensor removal alongside its gasket. Put the ECT sensor into position while using a fresh gasket and tighten to 20.4 N.m (208 kgf.cm, 15 ft.lbf) then reattach its connector. Reinstall the throttle body to the intake manifolds by putting on a new gasket and fastening the 2 bolts and 2 nuts to a torque of 18 N.m (185 kgf.cm, 13 ft.lbf). Lastly reconnect the accelerator cable. The next step is to insert the intake air connector before adding engine coolant to complete the procedure by placing back the throttle body cover.